Package: amd64-microcode
Description-md5: c5296e9fb6c0cbc6d0e238cd0cf80dc3
Description-en: Platform firmware and microcode for AMD CPUs and SoCs
 This package contains microcode patches for AMD AMD64
 processors.  AMD releases microcode patches to correct
 processor behavior as documented in the respective processor
 revision guides.
 .
 This package includes the required firmware to enable AMD
 SEV (Secure Encrypted Virtualization) functionality.
 .
 This package also includes AMD TAs (Trusted Applications)
 required by AMD platform drivers such as AMD PMF (Platform
 Management Framework).
 .
 For Intel processors, please refer to the intel-microcode package.

Package: apache2
Description-md5: d02426bc360345e5acd45367716dc35c
Description-en: Apache HTTP Server
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 Installing this package results in a full installation, including the
 configuration files, init scripts and support scripts.

Package: apache2-bin
Description-md5: 37901ca6bbb9305b61d0920ecc08204f
Description-en: Apache HTTP Server (modules and other binary files)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains the binaries only and does not set up a working
 web-server instance. Install the "apache2" package to get a fully working
 instance.

Package: apache2-data
Description-md5: 9f2fab36019a61312dec627d1cd80365
Description-en: Apache HTTP Server (common files)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package contains architecture-independent common files such as icons,
 error pages and static index files.

Package: apache2-dev
Description-md5: 8ba6f3b272c39cc7a08a802594285f02
Description-en: Apache HTTP Server (development headers)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package provides development headers and the apxs2 binary for the Apache
 2 HTTP server, useful to develop and link third party additions to the Debian
 Apache HTTP server package.
 .
 It also provides dh_apache2 and dh sequence addons useful to install various
 Debian Apache2 extensions with debhelper. It supports
  - Apache 2 module configurations and shared objects
  - Site configuration files
  - Global configuration files

Package: apache2-doc
Description-md5: 04f8562fb3fd21e5886e40af9aeb7b7d
Description-en: Apache HTTP Server (on-site documentation)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package provides the documentation for the Apache 2 HTTP server. The
 documentation is shipped in HTML format and can be accessed from a local
 running Apache HTTP server instance or by browsing the file system directly.

Package: apache2-ssl-dev
Description-md5: 160d9bdafec462b08db62740b1eb83d2
Description-en: Apache HTTP Server (mod_ssl development headers)
 The Apache HTTP Server Project's goal is to build a secure, efficient and
 extensible HTTP server as standards-compliant open source software. The
 result has long been the number one web server on the Internet.
 .
 This package provides the development header and the dependencies for
 modules that interact with mod_ssl's internal openssl state.

Package: apache2-utils
Description-md5: f1e2440381fa90571f125990da6a52fc
Description-en: Apache HTTP Server (utility programs for web servers)
 Provides some add-on programs useful for any web server.  These include:
  - ab (Apache benchmark tool)
  - fcgistarter (Start a FastCGI program)
  - logresolve (Resolve IP addresses to hostnames in logfiles)
  - htpasswd (Manipulate basic authentication files)
  - htdigest (Manipulate digest authentication files)
  - htdbm (Manipulate basic authentication files in DBM format, using APR)
  - htcacheclean (Clean up the disk cache)
  - rotatelogs (Periodically stop writing to a logfile and open a new one)
  - split-logfile (Split a single log including multiple vhosts)
  - checkgid (Checks whether the caller can setgid to the specified group)
  - check_forensic (Extract mod_log_forensic output from Apache log files)
  - httxt2dbm (Generate dbm files for use with RewriteMap)

Package: autopoint
Description-md5: 6cb55ac1308215a3073d2226782af37f
Description-en: tool for setting up gettext infrastructure in a source package
 The `autopoint' program copies standard gettext infrastructure files
 into a source package.  It extracts from a macro call of the form
 `AM_GNU_GETTEXT_VERSION(VERSION)', found in the package's
 `configure.in' or `configure.ac' file, the gettext version used by the
 package, and copies the infrastructure files belonging to this version
 into the package.

Package: avahi-daemon
Description-md5: 13d651a25febc553220e03e75c6f4c7b
Description-en: Avahi mDNS/DNS-SD daemon
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the Avahi Daemon which represents your machine
 on the network and allows other applications to publish and resolve
 mDNS/DNS-SD records.

Package: avahi-utils
Description-md5: 58895f03e39692a5213ffb4d5bbc3564
Description-en: Avahi browsing, publishing and discovery utilities
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration.  For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains several utilities that allow you to interact with
 the Avahi daemon, including publish, browsing and discovering services.

Package: bind9
Description-md5: 2cdf89d501b5ca6fe55e945de47cc047
Description-en: Internet Domain Name Server
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package provides the server and related configuration files.

Package: bind9-dev
Description-md5: 69797331ca76eb64604dd14b287f8572
Description-en: Static Libraries and Headers used by BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package contains a bundle of static libraries and header files used by
 BIND 9.
 .
 Please be aware that the BIND 9 libraries are considered private by upstream
 developers and the API and ABI might break at any time.

Package: bind9-dnsutils
Description-md5: 41cc23046dad427af742ed10a4568530
Description-en: Clients provided with BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers various client programs related to DNS that are
 derived from the BIND 9 source tree.
 .
  - dig - query the DNS in various ways
  - nslookup - the older way to do it
  - nsupdate - perform dynamic updates (See RFC2136)

Package: bind9-doc
Description-md5: 33e946a174be0a402f3511f1d76b9a00
Description-en: Documentation for BIND 9
 This package provides various documents that are useful for maintaining a
 working BIND 9 installation.

Package: bind9-host
Description-md5: 2dd2359e6a96f700ef352e6924685162
Description-en: DNS Lookup Utility
 This package provides the 'host' DNS lookup utility in the form that
 is bundled with the BIND 9 sources.

Package: bind9-libs
Description-md5: 5d0130b772445112be93a9bd80da10e6
Description-en: Shared Libraries used by BIND 9
 The Berkeley Internet Name Domain (BIND 9) implements an Internet domain
 name server.  BIND 9 is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package contains a bundle of shared libraries used by BIND 9.

Package: bind9-utils
Description-md5: c30ede916daac07ed6c19887e9f7d3f2
Description-en: Utilities for BIND 9
 This package provides various utilities that are useful for maintaining a
 working BIND 9 installation.

Package: binutils
Description-md5: fde49b4cfeaad346a6e094f973da28d7
Description-en: GNU assembler, linker and binary utilities
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs.

Package: binutils-aarch64-linux-gnu
Description-md5: b1fa078aa1b7251d4f6c406e117f03f9
Description-en: GNU binary utilities, for aarch64-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the aarch64-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for aarch64-linux-gnu and aarch64-linux-gnu is not your native
 platform.

Package: binutils-aarch64-linux-gnu-dbg
Description-md5: fff9959cbd9ee77b431761dfbbeae3a2
Description-en: GNU binary utilities, for aarch64-linux-gnu target (debug symbols)
 This package provides debug symbols for binutils-aarch64-linux-gnu.

Package: binutils-arm-linux-gnueabihf
Description-md5: 128af1a08153dc96e513aa5cad5cbb55
Description-en: GNU binary utilities, for arm-linux-gnueabihf target
 This package provides GNU assembler, linker and binary utilities
 for the arm-linux-gnueabihf target.
 .
 You don't need this package unless you plan to cross-compile programs
 for arm-linux-gnueabihf and arm-linux-gnueabihf is not your native
 platform.

Package: binutils-arm-linux-gnueabihf-dbg
Description-md5: 5f3fb1fe8ab9e0b0adfc0d09a83ce8bc
Description-en: GNU binary utilities, for arm-linux-gnueabihf target (debug symbols)
 This package provides debug symbols for binutils-arm-linux-gnueabihf.

Package: binutils-common
Description-md5: 4ccec6ceb2c180320ed503f61b81ec4b
Description-en: Common files for the GNU assembler, linker and binary utilities
 This package contains the localization files used by binutils packages for
 various target architectures and parts of the binutils documentation. It is
 not useful on its own.

Package: binutils-dbg
Description-md5: 77de33f2070a32c149f134259ecaad7a
Description-en: GNU assembler, linker and binary utilities(debug symbols)
 This package provides debug symbols for binutils.

Package: binutils-dev
Description-md5: ddc22c04156534b000b4f021b88a6023
Description-en: GNU binary utilities (BFD development files)
 This package includes header files and static libraries necessary to build
 programs which use the GNU BFD library, which is part of binutils.  Note
 that building Debian packages which depend on the shared libbfd is Not
 Allowed.

Package: binutils-doc
Description-md5: 61fd9f95707b9eb9ad8fe9b13a862636
Description-en: Documentation for the GNU assembler, linker and binary utilities
 This package consists of the documentation for the GNU assembler,
 linker and binary utilities in info format.

Package: binutils-i686-gnu
Description-md5: 24fd0e408469563945d7b1cfaa26f7a4
Description-en: GNU binary utilities, for i686-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the i686-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for i686-gnu and i686-gnu is not your native
 platform.

Package: binutils-i686-gnu-dbg
Description-md5: 7fa23a1128d32cddc515c64d985711d8
Description-en: GNU binary utilities, for i686-gnu target (debug symbols)
 This package provides debug symbols for binutils-i686-gnu.

Package: binutils-i686-linux-gnu
Description-md5: a79ff2c9e374ae45436dd8a2f345ead9
Description-en: GNU binary utilities, for i686-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the i686-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for i686-linux-gnu and i686-linux-gnu is not your native
 platform.

Package: binutils-i686-linux-gnu-dbg
Description-md5: f9e2b93b0081f6e9f8ef3142302562df
Description-en: GNU binary utilities, for i686-linux-gnu target (debug symbols)
 This package provides debug symbols for binutils-i686-linux-gnu.

Package: binutils-loongarch64-linux-gnu
Description-md5: e12630a1ca99aee76f281ee7cbe918cc
Description-en: GNU binary utilities, for loongarch64-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the loongarch64-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for loongarch64-linux-gnu and loongarch64-linux-gnu is not your native
 platform.

Package: binutils-loongarch64-linux-gnu-dbg
Description-md5: bc5ff14fa06d94710490a1c164f1c3b0
Description-en: GNU binary utilities, for loongarch64-linux-gnu target (debug symbols)
 This package provides debug symbols for binutils-loongarch64-linux-gnu.

Package: binutils-multiarch
Description-md5: f9de0df7e70bff89b6d3519f04688470
Description-en: Binary utilities that support multi-arch targets
 The programs in this package are used to manipulate binary and object
 files that may have been created on other architectures.  This package
 is primarily for multi-architecture developers and cross-compilers and
 is not needed by normal users or developers.  Note that a cross-assembling
 version of gas is not included in this package, just the binary utilities.
 .
 NORMAL USERS SHOULD NOT INSTALL THIS PACKAGE.  It's meant only for those
 requiring support for reading info from binaries from other architectures.

Package: binutils-multiarch-dbg
Description-md5: 061b51a454c349a8731681b9db245269
Description-en: Binary utilities that support multi-arch targets (debug symbols)
 This package provides debug symbols for binutils-multiarch.

Package: binutils-multiarch-dev
Description-md5: adf07629018b12b2492a658992c9a6a5
Description-en: GNU binary utilities that support multi-arch targets (BFD development files)
 This package includes header files, static and shared libraries necessary
 to build programs which use the GNU BFD library for multi-arch targets,
 which is part of binutils. Note that building Debian packages which depend
 on the shared libbfd is Not Allowed.
 .
 NORMAL USERS SHOULD NOT INSTALL THIS PACKAGE.  It's meant only for those
 requiring support for reading info from binaries from other architectures.

Package: binutils-powerpc-linux-gnu
Description-md5: 27ff7dc3671a44b2b760c410b360f60d
Description-en: GNU binary utilities, for powerpc-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the powerpc-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for powerpc-linux-gnu and powerpc-linux-gnu is not your native
 platform.

Package: binutils-powerpc-linux-gnu-dbg
Description-md5: 961df13d4c2eeb6f5486a5ac13511694
Description-en: GNU binary utilities, for powerpc-linux-gnu target (debug symbols)
 This package provides debug symbols for binutils-powerpc-linux-gnu.

Package: binutils-powerpc64le-linux-gnu
Description-md5: 77690e6e34c8eb2ce8aa69b8fc01d9ef
Description-en: GNU binary utilities, for powerpc64le-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the powerpc64le-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for powerpc64le-linux-gnu and powerpc64le-linux-gnu is not your native
 platform.

Package: binutils-powerpc64le-linux-gnu-dbg
Description-md5: e85c7ee02c52a86e214843dd18632480
Description-en: GNU binary utilities, for powerpc64le-linux-gnu target (debug symbols)
 This package provides debug symbols for binutils-powerpc64le-linux-gnu.

Package: binutils-riscv64-linux-gnu
Description-md5: 030299bc1daf6eba16c06b76d0cd4a53
Description-en: GNU binary utilities, for riscv64-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the riscv64-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for riscv64-linux-gnu and riscv64-linux-gnu is not your native
 platform.

Package: binutils-riscv64-linux-gnu-dbg
Description-md5: 1ca6a2cb739bd3daa03246115653b8d0
Description-en: GNU binary utilities, for riscv64-linux-gnu target (debug symbols)
 This package provides debug symbols for binutils-riscv64-linux-gnu.

Package: binutils-s390x-linux-gnu
Description-md5: fbec9c58067c885ede097ea1450a6669
Description-en: GNU binary utilities, for s390x-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the s390x-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for s390x-linux-gnu and s390x-linux-gnu is not your native
 platform.

Package: binutils-s390x-linux-gnu-dbg
Description-md5: 34906c8686c1901657eae6e2ffbf4fbe
Description-en: GNU binary utilities, for s390x-linux-gnu target (debug symbols)
 This package provides debug symbols for binutils-s390x-linux-gnu.

Package: binutils-sparc-linux-gnu
Description-md5: 9222d33fa308a7cb5d6b749faea45093
Description-en: GNU binary utilities, for sparc-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the sparc-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for sparc-linux-gnu and sparc-linux-gnu is not your native
 platform.

Package: binutils-sparc-linux-gnu-dbg
Description-md5: bfb9cbe49c12949fc2eb4671ffc8ef03
Description-en: GNU binary utilities, for sparc-linux-gnu target (debug symbols)
 This package provides debug symbols for binutils-sparc-linux-gnu.

Package: binutils-x86-64-gnu
Description-md5: 61da8859cdfff1dd2e7207d3946c0439
Description-en: GNU binary utilities, for x86-64-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the x86-64-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for x86-64-gnu and x86-64-gnu is not your native
 platform.

Package: binutils-x86-64-gnu-dbg
Description-md5: 66528c56092965f3fe0b88365454035d
Description-en: GNU binary utilities, for x86-64-gnu target (debug symbols)
 This package provides debug symbols for binutils-x86-64-gnu.

Package: binutils-x86-64-linux-gnu
Description-md5: f1a6cb2c801dffeb3efc5a51449d0072
Description-en: GNU binary utilities, for x86-64-linux-gnu target
 This package provides GNU assembler, linker and binary utilities
 for the x86-64-linux-gnu target.
 .
 You don't need this package unless you plan to cross-compile programs
 for x86-64-linux-gnu and x86-64-linux-gnu is not your native
 platform.

Package: binutils-x86-64-linux-gnu-dbg
Description-md5: 9ae2ff4892c54c669a7b426fbcc946a7
Description-en: GNU binary utilities, for x86-64-linux-gnu target (debug symbols)
 This package provides debug symbols for binutils-x86-64-linux-gnu.

Package: binutils-x86-64-linux-gnux32
Description-md5: 62ae79d9e154410f6678ab69c09b357c
Description-en: GNU binary utilities, for x86-64-linux-gnux32 target
 This package provides GNU assembler, linker and binary utilities
 for the x86-64-linux-gnux32 target.
 .
 You don't need this package unless you plan to cross-compile programs
 for x86-64-linux-gnux32 and x86-64-linux-gnux32 is not your native
 platform.

Package: binutils-x86-64-linux-gnux32-dbg
Description-md5: 221d8face48635e6f8304bf2d57a6107
Description-en: GNU binary utilities, for x86-64-linux-gnux32 target (debug symbols)
 This package provides debug symbols for binutils-x86-64-linux-gnux32.

Package: build-essential
Description-md5: 90ef0ef86cafda0bd16f746eb621d9da
Description-en: Informational list of build-essential packages
 If you do not plan to build Debian packages, you don't need this
 package.  Starting with dpkg (>= 1.14.18) this package is required
 for building Debian packages.
 .
 This package contains an informational list of packages which are
 considered essential for building Debian packages.  This package also
 depends on the packages on that list, to make it easy to have the
 build-essential packages installed.
 .
 If you have this package installed, you only need to install whatever
 a package specifies as its build-time dependencies to build the
 package.  Conversely, if you are determining what your package needs
 to build-depend on, you can always leave out the packages this
 package depends on.
 .
 This package is NOT the definition of what packages are
 build-essential; the real definition is in the Debian Policy Manual.
 This package contains merely an informational list, which is all
 most people need.   However, if this package and the manual disagree,
 the manual is correct.

Package: bzip2
Description-md5: 1e71313ce794d3de1e3bc63ac58885b5
Description-en: high-quality block-sorting file compressor - utilities
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).

Package: bzip2-doc
Description-md5: 2cfb09927b68e01a771bb52d416c05ba
Description-en: high-quality block-sorting file compressor - documentation
 This package contains the bzip2 user manual in HTML, PDF, PS and Texinfo
 formats.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).

Package: comerr-dev
Description-md5: 2188fc96978a9083bb050c70bc3cab2a
Description-en: common error description library - headers and static libraries
 libcom_err is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
 .
 This package contains the development environment for the com_err library.

Package: cpp-15
Description-md5: 93a75b5e1f4b43c36eba0239b6fab6a3
Description-en: GNU C preprocessor
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.

Package: cpp-15-doc
Description-md5: 22a9ba311e91d8d744a9e4df2030d2bf
Description-en: Documentation for the GNU C preprocessor (cpp)
 Documentation for the GNU C preprocessor in info format.

Package: cpp-15-for-build
Description-md5: 4d867f66a5170c25af70c1bda2672d33
Description-en: GNU C preprocessor for the build architecture
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor configured for the build architecture but not
 the compiler.
 .
 This is a dependency package.

Package: cpp-15-for-host
Description-md5: bdce3f8f67a0382ae150b074db5ebb6f
Description-en: GNU C preprocessor for the host architecture
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor configured for the host architecture but not
 the compiler.
 .
 When using this package, tools must be invoked with an architecture prefix.
 .
 This is a dependency package.

Package: cpp-15-x86-64-linux-gnu
Description-md5: 43b850052510e8ce407b526ada2b0877
Description-en: GNU C preprocessor for x86_64-linux-gnu
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor configured for x86_64-linux-gnu architecture but not
 the compiler.

Package: crossbuild-essential-arm64
Description-md5: 9b2629bcd07961cfcb27934f1371078a
Description-en: Informational list of cross-build-essential packages
 If you do not plan to cross build Debian packages, you don't need
 this package.  Starting with sbuild (>= 0.63.0) this package is
 required for cross building Debian packages in a chroot.
 .
 This package contains an informational list of packages which are
 considered essential for cross building Debian packages.  This
 package also depends on the packages on that list, to make it easy to
 have the cross-build-essential packages installed.
 .
 If you have this package installed, you only need to install whatever
 a package specifies as its build-time dependencies to cross build the
 package.  Conversely, if you are determining what your package needs
 to build-depend on, you can always leave out the packages this
 package depends on.

Package: crossbuild-essential-armhf
Description-md5: 9b2629bcd07961cfcb27934f1371078a
Description-en: Informational list of cross-build-essential packages
 If you do not plan to cross build Debian packages, you don't need
 this package.  Starting with sbuild (>= 0.63.0) this package is
 required for cross building Debian packages in a chroot.
 .
 This package contains an informational list of packages which are
 considered essential for cross building Debian packages.  This
 package also depends on the packages on that list, to make it easy to
 have the cross-build-essential packages installed.
 .
 If you have this package installed, you only need to install whatever
 a package specifies as its build-time dependencies to cross build the
 package.  Conversely, if you are determining what your package needs
 to build-depend on, you can always leave out the packages this
 package depends on.

Package: crossbuild-essential-ppc64el
Description-md5: 9b2629bcd07961cfcb27934f1371078a
Description-en: Informational list of cross-build-essential packages
 If you do not plan to cross build Debian packages, you don't need
 this package.  Starting with sbuild (>= 0.63.0) this package is
 required for cross building Debian packages in a chroot.
 .
 This package contains an informational list of packages which are
 considered essential for cross building Debian packages.  This
 package also depends on the packages on that list, to make it easy to
 have the cross-build-essential packages installed.
 .
 If you have this package installed, you only need to install whatever
 a package specifies as its build-time dependencies to cross build the
 package.  Conversely, if you are determining what your package needs
 to build-depend on, you can always leave out the packages this
 package depends on.

Package: crossbuild-essential-riscv64
Description-md5: 9b2629bcd07961cfcb27934f1371078a
Description-en: Informational list of cross-build-essential packages
 If you do not plan to cross build Debian packages, you don't need
 this package.  Starting with sbuild (>= 0.63.0) this package is
 required for cross building Debian packages in a chroot.
 .
 This package contains an informational list of packages which are
 considered essential for cross building Debian packages.  This
 package also depends on the packages on that list, to make it easy to
 have the cross-build-essential packages installed.
 .
 If you have this package installed, you only need to install whatever
 a package specifies as its build-time dependencies to cross build the
 package.  Conversely, if you are determining what your package needs
 to build-depend on, you can always leave out the packages this
 package depends on.

Package: crossbuild-essential-s390x
Description-md5: 9b2629bcd07961cfcb27934f1371078a
Description-en: Informational list of cross-build-essential packages
 If you do not plan to cross build Debian packages, you don't need
 this package.  Starting with sbuild (>= 0.63.0) this package is
 required for cross building Debian packages in a chroot.
 .
 This package contains an informational list of packages which are
 considered essential for cross building Debian packages.  This
 package also depends on the packages on that list, to make it easy to
 have the cross-build-essential packages installed.
 .
 If you have this package installed, you only need to install whatever
 a package specifies as its build-time dependencies to cross build the
 package.  Conversely, if you are determining what your package needs
 to build-depend on, you can always leave out the packages this
 package depends on.

Package: dbus
Description-md5: 7c48e5e44b120f1b0ed0784fa95d28b4
Description-en: simple interprocess messaging system (system message bus)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package provides a fully-functional D-Bus system bus with activation
 support, used for communication between system services, and depends on
 most of the other components of the reference implementation of D-Bus.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.

Package: dbus-1-doc
Description-md5: 4ff746780e6dca0a27147236301ca4fd
Description-en: simple interprocess messaging system (documentation)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the API documentation for D-Bus, as well as
 the protocol specification.
 .
 See the dbus description for more information about D-Bus in general.

Package: dbus-bin
Description-md5: 60c953ae48eea76127af3e4d45509b3a
Description-en: simple interprocess messaging system (command line utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the D-Bus command-line utilities such as dbus-send
 and dbus-monitor.

Package: dbus-daemon
Description-md5: e4a95da24915a6ba2421c56a99e0f414
Description-en: simple interprocess messaging system (reference message bus)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains dbus-daemon, the reference implementation of a
 D-Bus message bus, and dbus-run-session, a utility to start a temporary
 session dbus-daemon in a constrained environment or for automated tests.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.

Package: dbus-session-bus-common
Description-md5: 28be2466e608cd8534898a94ebbb2139
Description-en: simple interprocess messaging system (session bus configuration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the configuration files defining the behaviour of
 the D-Bus session bus, used for applications and per-user services.
 These are used by the reference implementation in the dbus package,
 and by the reimplementation in the dbus-broker package.
 .
 To provide a complete D-Bus session bus, install one of the packages
 that implement the dbus-session-bus virtual package, such as
 dbus-user-session. The recommended implementation is indicated by
 the default-dbus-session-bus virtual package.

Package: dbus-system-bus-common
Description-md5: 32f105b16334dd8e7426fbb63aea36a3
Description-en: simple interprocess messaging system (system bus configuration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the configuration files defining the behaviour of
 the D-Bus system bus, used for system services such as networking and
 storage management services. It is also responsible for creating the
 'messagebus' system user account used to run the system bus.
 These are used by the reference implementation in the dbus package,
 and by the reimplementation in the dbus-broker package.
 .
 To provide a complete D-Bus system bus, install one of the packages
 that implement the dbus-system-bus virtual package, such as dbus.
 The recommended implementation is indicated by the default-dbus-system-bus
 virtual package.

Package: dbus-user-session
Description-md5: be4453093922af92deac14b4e8458a83
Description-en: simple interprocess messaging system (systemd --user integration)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 On systemd systems, this package opts in to the session model in which
 a user's session starts the first time they log in, and does not end
 until all their login sessions have ended. This model merges all
 parallel non-graphical login sessions (text mode, ssh, cron, etc.), and up
 to one graphical session, into a single "user-session" or "super-session"
 within which all background D-Bus services are shared.
 .
 Multiple graphical sessions per user are not currently supported in this
 mode; as a result, it is particularly suitable for gdm, which responds to
 requests to open a parallel graphical session by switching to the existing
 graphical session and unlocking it.
 .
 To retain dbus' traditional session semantics, in which login sessions
 are artificially isolated from each other, remove this package and install
 dbus-x11 instead.
 .
 See the dbus package description for more information about D-Bus in general.

Package: dbus-x11
Description-md5: 45c23195ec583590a9da6a179b645dca
Description-en: simple interprocess messaging system (X11 deps)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the dbus-launch utility, which automatically
 launches one D-Bus session bus per X11 display per user. If the
 dbus-user-session package is also installed, it takes precedence over
 this package.
 .
 See the dbus description for more information about D-Bus in general.

Package: dirmngr
Description-md5: 98983bb8fc50acb110a75a76f975cbdb
Description-en: GNU privacy guard - network certificate management service
 dirmngr is a server for managing and downloading OpenPGP and X.509
 certificates, as well as updates and status signals related to those
 certificates.  For OpenPGP, this means pulling from the public
 HKP/HKPS keyservers, or from LDAP servers.  For X.509 this includes
 Certificate Revocation Lists (CRLs) and Online Certificate Status
 Protocol updates (OCSP).  It is capable of using Tor for network
 access.
 .
 dirmngr is used for network access by gpg, gpgsm, and dirmngr-client,
 among other tools.  Unless this package is installed, the parts of
 the GnuPG suite that try to interact with the network will fail.

Package: dkms
Description-md5: 232c475017017fa9b762bad26978f5d1
Description-en: Dynamic Kernel Module System (DKMS)
 DKMS is a framework designed to allow individual kernel modules to be upgraded
 without changing the whole kernel. It is also very easy to rebuild modules as
 you upgrade kernels.

Package: e2fsprogs
Description-md5: 92d0fdf684262bbfa702eaea3f50b97e
Description-en: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.

Package: e2fsprogs-l10n
Description-md5: 807b6cb4fcea4e66152bf7951fcc5515
Description-en: ext2/ext3/ext4 file system utilities - translations
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides translations for messages for programs found in
 the 'e2fsprogs' package.

Package: file
Description-md5: 5d23749cc510bff3ff8aca8793a9803e
Description-en: Recognize the type of data in a file using "magic" numbers
 The file command is "a file type guesser", a command-line tool that
 tells you in words what kind of data a file contains.
 .
 This package contains the file program itself.

Package: g++-15
Description-md5: 0a3fad3367cb994bd16c61b0e16a8b9c
Description-en: GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.

Package: g++-15-for-build
Description-md5: 6b662a2a3907f28ed9a0e2ac6a55d3ea
Description-en: GNU C++ compiler for the build architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This package contains C++ cross-compiler for arch_gnu architecture.
 .
 This is a dependency package.

Package: g++-15-for-host
Description-md5: 9390f1b2980c545f669a0b8b8d5b11e0
Description-en: GNU C++ compiler for the host architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This package contains C++ cross-compiler for the host architecture.
 .
 When using this package, tools must be invoked with an architecture prefix.
 .
 This is a dependency package.

Package: g++-15-multilib
Description-md5: 291f2f15035d2eb62358c5157bbae10c
Description-en: GNU C++ compiler (multilib support)
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This is a dependency package, depending on development packages
 for the non-default multilib architecture(s).

Package: g++-15-x86-64-linux-gnu
Description-md5: f28641d421c551d47a5e989009efe119
Description-en: GNU C++ compiler for x86_64-linux-gnu architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This package contains C++ cross-compiler for x86_64-linux-gnu architecture.

Package: ga68-15-doc
Description-md5: 9a8b7de6d96c2639a2c30910120b4bb2
Description-en: Documentation for the GNU Algol 68 compiler (ga68)
 Documentation for the GNU Algol 68 compiler in HTML and info format.

Package: gcc-14-base
Description-md5: b6e93638a6d08ea7a18929d7cf078e5d
Description-en: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).

Package: gcc-15
Description-md5: 394374e688b1afb3af5f419895d29698
Description-en: GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.

Package: gcc-15-base
Description-md5: b6e93638a6d08ea7a18929d7cf078e5d
Description-en: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).

Package: gcc-15-doc
Description-md5: bf320d6d806b62ff03b567626d36b1fb
Description-en: Documentation for the GNU compilers (gcc, gobjc, g++)
 Documentation for the GNU compilers in info format.

Package: gcc-15-for-build
Description-md5: 1231e8563c440c0230388f9db0660a3c
Description-en: GNU C compiler for the build architecture
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
 .
 This is a dependency package.

Package: gcc-15-for-host
Description-md5: 2f6f77eeb03535ba77299cfe1a0ef756
Description-en: GNU C compiler for the host architecture
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
 .
 When using this package, tools must be invoked with an architecture prefix.
 .
 This is a dependency package.

Package: gcc-15-multilib
Description-md5: d1bddfa375b62324197c575c04fb2e4e
Description-en: GNU C compiler (multilib support)
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
 .
 This is a dependency package, depending on development packages
 for the non-default multilib architecture(s).

Package: gcc-15-x86-64-linux-gnu
Description-md5: 7bf4c826102db622ef3a4d867a96ef4e
Description-en: GNU C compiler for the x86_64-linux-gnu architecture
 This is the GNU C compiler for the x86_64-linux-gnu architecture,
 a fairly portable optimizing compiler for C.

Package: gettext
Description-md5: 0db85b3962766eeef57d5324263a308e
Description-en: GNU Internationalization utilities
 Interesting for authors or maintainers of other packages or programs
 which they want to see internationalized.

Package: gettext-base
Description-md5: 6c8ed1da584066e0871910b60d931f43
Description-en: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.

Package: gettext-doc
Description-md5: 966c7204112700e6dcb867375471b50b
Description-en: Documentation for GNU gettext
 This package contains the HTML documentation for GNU gettext, as well as
 simple "hello world" examples in several programming languages.

Package: gfortran-15
Description-md5: 5dd93c5d21d0717205bc5a3b538b0ca2
Description-en: GNU Fortran compiler
 This is the GNU Fortran compiler, which compiles
 Fortran on platforms supported by the gcc compiler. It uses the
 gcc backend to generate optimized code.

Package: gfortran-15-doc
Description-md5: 17a01a9ada93e104865a01e6615e2401
Description-en: Documentation for the GNU Fortran compiler (gfortran)
 Documentation for the GNU Fortran compiler in info format.

Package: gfortran-15-for-build
Description-md5: 748b70d5e078f51a0a1a8810f97e7888
Description-en: GNU Fortran compiler for the build architecture
 This is the GNU Fortran compiler for the build architecture,
 which compiles Fortran on platforms supported by the gcc compiler.
 It uses the gcc backend to generate optimized code.
 .
 This is a dependency package.

Package: gfortran-15-for-host
Description-md5: 45750004f61e98b776fd803bf4361bf0
Description-en: GNU Fortran compiler for the host architecture
 This is the GNU Fortran compiler for the host architecture,
 which compiles Fortran on platforms supported by the gcc compiler.
 It uses the gcc backend to generate optimized code.
 .
 When using this package, tools must be invoked with an architecture prefix.
 .
 This is a dependency package.

Package: gfortran-15-multilib
Description-md5: ad5cf91f123889c593b105572b4a958c
Description-en: GNU Fortran compiler (multilib support)
 This is the GNU Fortran compiler, which compiles Fortran on platforms
 supported by the gcc compiler.
 .
 This is a dependency package, depending on development packages
 for the non-default multilib architecture(s).

Package: gfortran-15-x86-64-linux-gnu
Description-md5: d58c4dfdb182f598353d755dda19253d
Description-en: GNU Fortran compiler for the x86_64-linux-gnu architecture
 This is the GNU Fortran compiler for the x86_64-linux-gnu architecture,
 which compiles Fortran on platforms supported by the gcc compiler.
 It uses the gcc backend to generate optimized code.

Package: gir1.2-avahi-0.6
Description-md5: 4c871be80791e6d6a8d9f13fc8cef166
Description-en: GObject introspection data for Avahi
 This package contains introspection data for Avahi using libavahi-gobject.
 .
 It can be used by packages using the GIRepository format to generate
 dynamic bindings.

Package: gir1.2-gdesktopenums-3.0
Description-md5: 477a4df605ef5075dfb853bde74cb266
Description-en: GObject introspection for GSettings desktop-wide schemas
 gsettings-desktop-schemas contains a collection of GSettings schemas for
 settings shared by various components of a desktop.
 .
 This package contains introspection data for GSettings desktop-wide schemas. It
 can be used by packages using the GIRepository format to generate
 dynamic bindings.

Package: gir1.2-girepository-3.0
Description-md5: 72841bba9afa24146f8f7c26846f869a
Description-en: Introspection data for GIRepository library, API version 3.0
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 This package contains the introspection data for the GIRepository library,
 which can be used to manipulate the search path used by language bindings
 and load introspection data.

Package: gir1.2-girepository-3.0-dev
Description-md5: b0d8e7489d5f7bcf0befc859b3f8d7af
Description-en: GIR XML for GIRepository library, API version 3.0
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 This package contains the introspection data for the GIRepository
 library, in the GIR XML format used to generate bindings for static languages
 like C++, D and Haskell.

Package: gir1.2-glib-2.0
Description-md5: e3ee82927c5a64d9d4a153035675edf2
Description-en: Introspection data for GLib, GObject, Gio and GModule
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 This package contains the introspection data for the GLib, GObject,
 GModule and Gio libraries, in the typelib format used to generate
 bindings for dynamic languages like JavaScript and Python.

Package: gir1.2-glib-2.0-dev
Description-md5: daaf168898f3621e3912b9d66ac0654b
Description-en: GIR XML for GLib, GObject, Gio and GModule
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 This package contains the introspection data for the GLib, GObject,
 GModule and Gio libraries, in the GIR XML format used to generate
 bindings for static languages like C++, D and Haskell.

Package: gir1.2-gnomebg-4.0
Description-md5: 2f6995c0e5f28641e972bbaeccf6dde2
Description-en: Introspection data for GnomeBG (GTK 4)
 The gnome-desktop set of libraries provides various utility functions
 that are used in multiple components of the GNOME desktop, but do not
 have a sufficiently stable API to be included in core libraries such
 as GLib and GTK.
 .
 This package contains GObject-Introspection bindings for background image
 (wallpaper) management.

Package: gir1.2-gnomedesktop-3.0
Description-md5: 4292c4bbae4ffe7e7b5d36a3acef86da
Description-en: Introspection data for GnomeDesktop (GTK 3)
 This package provides the include files and static library for the GNOME
 desktop library functions.
 .
 This package contains the introspection data for GnomeDesktop

Package: gir1.2-gnomedesktop-4.0
Description-md5: 0092eeeafa9d29101b113733957c0075
Description-en: Introspection data for GnomeDesktop (GTK 4)
 The gnome-desktop set of libraries provides various utility functions
 that are used in multiple components of the GNOME desktop, but do not
 have a sufficiently stable API to be included in core libraries such
 as GLib and GTK.
 .
 This package contains GObject-Introspection bindings for miscellaneous
 utility functions.

Package: gir1.2-gnomerr-4.0
Description-md5: 3d7fba344d0bdff1e4575681429c9d24
Description-en: Introspection data for GnomeRR (GTK 4)
 The gnome-desktop set of libraries provides various utility functions
 that are used in multiple components of the GNOME desktop, but do not
 have a sufficiently stable API to be included in core libraries such
 as GLib and GTK.
 .
 This package contains GObject-Introspection bindings for display mode
 management.

Package: gir1.2-gstreamer-1.0
Description-md5: 690d41f7ae6f89096e0ae65e4d4ffe68
Description-en: GObject introspection data for the GStreamer library
 This package contains introspection data for the GStreamer streaming media
 framework.
 .
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 It can be used by packages using the GIRepository format to generate
 dynamic bindings.

Package: gir1.2-gtk-3.0
Description-md5: 0e856cde3e86eb181a419da2e80d941c
Description-en: GTK graphical user interface library -- gir bindings
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package can be used by other packages using the GIRepository format to
 generate dynamic bindings.

Package: gir1.2-ibus-1.0
Description-md5: c39b02e52edca9051d32a1b84aa1381f
Description-en: Intelligent Input Bus - introspection data
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains the GObject introspection data which are needed
 for developing the IBus applications in various programming languages
 with GObject introspection support.

Package: gir1.2-javascriptcoregtk-4.1
Description-md5: 027f494c193b6c1ec30c4f4e3ef630b4
Description-en: JavaScript engine library from WebKitGTK - GObject introspection data
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.1).
 .
 This package contains the introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.

Package: gir1.2-javascriptcoregtk-6.0
Description-md5: 17d7c8ce9189cbe47a247c5c3c8c7f0c
Description-en: JavaScript engine library from WebKitGTK - GObject introspection data
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 6.0).
 .
 This package contains the introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.

Package: gir1.2-webkit-6.0
Description-md5: 3d5547cc72c351c9257ef24f4ffdee08
Description-en: Web content engine library for GTK - GObject introspection data
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 6.0 of the API and uses libsoup v3 for
 the networking stack and the GTK 4 widget toolkit.
 .
 This package contains introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.

Package: gir1.2-webkit2-4.1
Description-md5: 3f163120226ab20f9e8445c6a1d20988
Description-en: Web content engine library for GTK - GObject introspection data
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.1 of the API and uses libsoup v3 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains introspection data, which can be used by
 packages using the GIRepository format to generate dynamic bindings.

Package: girepository-tools
Description-md5: c2408aca51f77a5d47ae47ed84aa9f0d
Description-en: Tools for working with GObject-Introspection repositories
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK, GIMP, and GNOME.
 .
 This package contains developer-oriented command-line tools for working
 with GObject-Introspection typelibs and GIR XML, which are used to
 provide language bindings and documentation for GLib-based libraries:
 .
  * x86_64-linux-gnu-gi-compile-repository
  * x86_64-linux-gnu-gi-decompile-typelib
  * x86_64-linux-gnu-gi-inspect-typelib
 .
 When used via this package, these tools must be invoked with their
 host-architecture-specific names.
 .
 For command-line compatibility with non-Debian-based GLib packaging,
 the libglib2.0-dev package also provides versions of these tools for the
 system's primary architecture, named without the architecture prefix.

Package: glib-networking
Description-md5: dce7ee23bcf70829c58fe6f9a749eca7
Description-en: network-related giomodules for GLib
 This package contains various network related extensions for the GIO
 library.

Package: glib-networking-common
Description-md5: 53a1d4e1dd58e8fb13abe57894840f62
Description-en: network-related giomodules for GLib - data files
 This package contains data files and translations for the GIO network
 extensions in glib-networking.

Package: glib-networking-services
Description-md5: 365372e1c223a507a4114d685b245121
Description-en: network-related giomodules for GLib - D-Bus services
 This package contains D-Bus services that are used by the GIO network
 extensions in glib-networking, for actions that need to be done in a
 separate process.

Package: gnome-desktop3-data
Description-md5: 5ce5840cc354bd74e7e4932be3851519
Description-en: Common files for GNOME desktop apps
 This package includes some files that are shared between several GNOME
 apps (internationalization files).

Package: gnu-coreutils
Description-md5: d0d975dec3625409d24be1238cede238
Description-en: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes

Package: gnupg
Description-md5: 2421c574774486effdededa540cfb1c7
Description-en: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the full suite of GnuPG tools for cryptographic
 communications and data storage.

Package: gnupg-l10n
Description-md5: 7fad035451f503be001479931e85b925
Description-en: GNU privacy guard - localization files
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 This package contains the translation files for the use of GnuPG in
 non-English locales.

Package: gnupg-utils
Description-md5: ce8039d6b7bf19d87f5f661d482c78b4
Description-en: GNU privacy guard - utility programs
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains several useful utilities for manipulating
 OpenPGP data and other related cryptographic elements.  It includes:
 .
  * addgnupghome -- create .gnupg home directories
  * applygnupgdefaults -- run gpgconf --apply-defaults for all users
  * gpgparsemail -- parse an e-mail message into annotated format
  * gpgsplit -- split a sequence of OpenPGP packets into files
  * gpgtar -- encrypt or sign files in an archive
  * kbxutil -- list, export, import Keybox data
  * lspgpot -- convert PGP ownertrust values to GnuPG
  * migrate-pubring-from-classic-gpg -- use only "modern" formats
  * symcryptrun -- use simple symmetric encryption tool in GnuPG framework
  * watchgnupg -- watch socket-based logs

Package: gnutls-doc
Description-md5: 75bd3d1bfb6319bbc964f2b7c3ed8b5a
Description-en: GNU TLS library - documentation and examples
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains all the GnuTLS documentation.

Package: gpg
Description-md5: 072a12509de7421dfcbf41d8921ce986
Description-en: GNU Privacy Guard -- minimalist public key operations
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains /usr/bin/gpg itself, and is useful on its own
 only for public key operations (encryption, signature verification,
 listing OpenPGP certificates, etc).  If you want full capabilities
 (including secret key operations, network access, etc), please
 install the "gnupg" package, which pulls in the full suite of tools.

Package: gpg-agent
Description-md5: 6c5c3942a5ec2e08c337466bd44b6cde
Description-en: GNU privacy guard - cryptographic agent
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the agent program gpg-agent which handles all
 secret key material for OpenPGP and S/MIME use.  The agent also
 provides a passphrase cache, which is used by pre-2.1 versions of
 GnuPG for OpenPGP operations.  Without this package, trying to do
 secret-key operations with any part of the modern GnuPG suite will
 fail.

Package: gpg-wks-client
Description-md5: 8033bb8d854542bf7c9451428191be6d
Description-en: GNU privacy guard - Web Key Service client
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package provides the GnuPG client for the Web Key Service
 protocol.
 .
 A Web Key Service is a service that allows users to upload keys per
 mail to be verified over https as described in
 https://tools.ietf.org/html/draft-koch-openpgp-webkey-service
 .
 For more information see: https://wiki.gnupg.org/WKS

Package: gpgconf
Description-md5: a54470fd043c15b13d18d29306678637
Description-en: GNU privacy guard - core configuration utilities
 GnuPG is GNU's tool for secure communication and data storage.
 .
 This package contains core utilities used by different tools in the
 suite offered by GnuPG.  It can be used to programmatically edit
 config files for tools in the GnuPG suite, to launch or terminate
 per-user daemons (if installed), etc.

Package: gpgsm
Description-md5: d09741caa0bbe13153a4e4c54325393d
Description-en: GNU privacy guard - S/MIME version
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC4880.
 .
 This package contains the gpgsm program. gpgsm is a tool to provide
 digital encryption and signing services on X.509 certificates and the
 CMS protocol. gpgsm includes complete certificate management.

Package: gpgv
Description-md5: 4ea8f4f4d6a0a387a4a3aeba3e6cc888
Description-en: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is actually a stripped-down version of gpg which is only able
 to check signatures. It is somewhat smaller than the fully-blown gpg
 and uses a different (and simpler) way to check that the public keys
 used to make the signature are valid. There are no configuration
 files and only a few options are implemented.

Package: gsettings-desktop-schemas
Description-md5: 97f1d5003d2c7b91b06ad6146ef3c5d4
Description-en: GSettings desktop-wide schemas
 gsettings-desktop-schemas contains a collection of GSettings schemas for
 settings shared by various components of a desktop.

Package: gsettings-desktop-schemas-dev
Description-md5: 39628a8dda830ce47f0c6955f25c1dde
Description-en: Development files for GSettings desktop-wide schemas
 gsettings-desktop-schemas contains a collection of GSettings schemas for
 settings shared by various components of a desktop.
 .
 This package contains the development files.

Package: gstreamer1.0-tools
Description-md5: 909df9df4ba32a53040e4e54751c1cfa
Description-en: Tools for use with GStreamer
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains versioned command-line tools for GStreamer.

Package: gtk-3-examples
Description-md5: d42b1b0d81a3e3495814814ff0293762
Description-en: example files for GTK 3
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the example files and a demonstration program
 for GTK3. It also contains the installed tests.

Package: gvfs
Description-md5: 61f453207c2ab18880315d27f13ee0fb
Description-en: userspace virtual filesystem - GIO module
 gvfs is a userspace virtual filesystem where mounts run as separate
 processes which you talk to via D-Bus. It also contains a gio module
 that seamlessly adds gvfs support to all applications using the gio
 API. It also supports exposing the gvfs mounts to non-gio applications
 using fuse.
 .
 This package contains the GIO module that lets applications use gvfs
 mounts.

Package: gvfs-backends
Description-md5: 2edda3393e212ed6ab9626b02fee32b9
Description-en: userspace virtual filesystem - backends
 gvfs is a userspace virtual filesystem where mounts run as separate
 processes which you talk to via D-Bus. It also contains a gio module
 that seamlessly adds gvfs support to all applications using the gio
 API. It also supports exposing the gvfs mounts to non-gio applications
 using fuse.
 .
 This package contains the afc, afp, archive, cdda, dav, dnssd, ftp,
 gphoto2, http, mtp, network, sftp, smb, smb-browse and wsdd backends.

Package: gvfs-common
Description-md5: 9572165fd324aff77138e36127f7d629
Description-en: userspace virtual filesystem - common data files
 gvfs is a userspace virtual filesystem where mounts run as separate
 processes which you talk to via D-Bus. It also contains a gio module
 that seamlessly adds gvfs support to all applications using the gio
 API. It also supports exposing the gvfs mounts to non-gio applications
 using fuse.
 .
 This package contains the data files and translations used by all gvfs
 components.

Package: gvfs-daemons
Description-md5: 3ce59381bd6888364e59f20a23789369
Description-en: userspace virtual filesystem - servers
 gvfs is a userspace virtual filesystem where mounts run as separate
 processes which you talk to via D-Bus. It also contains a gio module
 that seamlessly adds gvfs support to all applications using the gio
 API. It also supports exposing the gvfs mounts to non-gio applications
 using fuse.
 .
 This package contains the gvfs server and the minimal set of backends.

Package: gvfs-fuse
Description-md5: e8ae435dfe556826602d3a021208211e
Description-en: userspace virtual filesystem - fuse server
 gvfs is a userspace virtual filesystem where mounts run as separate
 processes which you talk to via D-Bus. It also contains a gio module
 that seamlessly adds gvfs support to all applications using the gio
 API. It also supports exposing the gvfs mounts to non-gio applications
 using fuse.
 .
 This package contains the gvfs-fuse server that exports gvfs mounts to
 all applications using FUSE.

Package: gvfs-libs
Description-md5: 6558598d97ea2bbb18ca95c90e7c0683
Description-en: userspace virtual filesystem - private libraries
 gvfs is a userspace virtual filesystem where mounts run as separate
 processes which you talk to via D-Bus. It also contains a gio module
 that seamlessly adds gvfs support to all applications using the gio
 API. It also supports exposing the gvfs mounts to non-gio applications
 using fuse.
 .
 This package contains private libraries with common functions between
 the daemons and the GIO module.

Package: gzip
Description-md5: 100720c9e2c6508f1a1f3731537b38e5
Description-en: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: haproxy
Description-md5: 29390feb7563fd9f1e74f245bf31a64c
Description-en: fast and reliable load balancing reverse proxy
 HAProxy is a TCP/HTTP reverse proxy which is particularly suited for high
 availability environments. It features connection persistence through HTTP
 cookies, load balancing, header addition, modification, deletion both ways. It
 has request blocking capabilities and provides interface to display server
 status.

Package: ibus
Description-md5: 489faf3b419b10c90a2fd62eb552cc93
Description-en: Intelligent Input Bus - core
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.

Package: ibus-data
Description-md5: 20fae0f850012a60e9321caa56ee9b38
Description-en: Intelligent Input Bus - data files
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains data files.

Package: ibus-doc
Description-md5: 09048d4e789485a527aee6fb9a9dd253
Description-en: Intelligent Input Bus - development documentation
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains the reference manual.

Package: ibus-gtk
Description-md5: 5da0983d45b25fb0be330f313d2d9b14
Description-en: Intelligent Input Bus - GTK2 support
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains the GTK2 IM module.

Package: ibus-gtk3
Description-md5: 5b8bb79ff41ec3bc9bee6b157b50059f
Description-en: Intelligent Input Bus - GTK3 support
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains the GTK3 IM module.

Package: ibus-gtk4
Description-md5: a67d845d70ce46303a8a500171f21fbb
Description-en: Intelligent Input Bus - GTK4 support
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains the GTK4 IM module.

Package: initramfs-tools
Description-md5: f406a6ad4452bdc36e9957a711143c2e
Description-en: generic modular initramfs generator (automation)
 This package builds a bootable initramfs for Linux kernel packages.  The
 initramfs is loaded along with the kernel and is responsible for
 mounting the root filesystem and starting the main init system.

Package: initramfs-tools-bin
Description-md5: 1f5515e186e08dbfff552d7af6b01ca8
Description-en: generic modular initramfs generator (binary tools)
 This package contains binaries used inside the initramfs images generated
 by initramfs-tools. It also contains the unmkinitramfs program that can be
 used to unpack an initramfs image.

Package: initramfs-tools-core
Description-md5: 8d2ce4976ab4fb33b898ed3006a086fa
Description-en: generic modular initramfs generator (core tools)
 This package contains the mkinitramfs program that can be used to
 create a bootable initramfs for a Linux kernel.  The initramfs should
 be loaded along with the kernel and is then responsible for mounting
 the root filesystem and starting the main init system.

Package: lib32asan8
Description-md5: 21a3c42c398c2fff43ee9449787256e4
Description-en: AddressSanitizer -- a fast memory error detector (32bit)
 AddressSanitizer (ASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.

Package: lib32atomic1
Description-md5: 4b9cd7e59833a54167ec848b4c3d9e48
Description-en: support library providing __atomic built-in functions (32bit)
 library providing __atomic built-in functions. When an atomic call cannot
 be turned into lock-free instructions, GCC will make calls into this library.

Package: lib32gcc-14-dev
Description-md5: 50201ee0230693f6a9313820d5854393
Description-en: GCC support library (32 bit development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.

Package: lib32gcc-15-dev
Description-md5: 50201ee0230693f6a9313820d5854393
Description-en: GCC support library (32 bit development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.

Package: lib32gcc-s1
Description-md5: a31c67d540f86442c895f2663cb4d5c9
Description-en: GCC support library (32 bit Version)
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.

Package: lib32gfortran-15-dev
Description-md5: 6b37f3090548ca719a28233db2276849
Description-en: Runtime library for GNU Fortran applications (32bit development files)
 This package contains the headers and static library files needed to build
 GNU Fortran applications.

Package: lib32gfortran5
Description-md5: 6b1141cbf03c78b07b329d00c2e7823f
Description-en: Runtime library for GNU Fortran applications (32bit)
 Library needed for GNU Fortran applications linked against the
 shared library.

Package: lib32go-14-dev
Description-md5: 0d206625198081e48dfdda7b339c3c73
Description-en: Runtime library for GNU Go applications (32bit development files)
 This package contains the headers and static library files needed to build
 GNU Go applications.

Package: lib32go-15-dev
Description-md5: 0d206625198081e48dfdda7b339c3c73
Description-en: Runtime library for GNU Go applications (32bit development files)
 This package contains the headers and static library files needed to build
 GNU Go applications.

Package: lib32go23
Description-md5: 7174520aedfeba49e54b8c36f55b7e95
Description-en: Runtime library for GNU Go applications (32bit)
 Library needed for GNU Go applications linked against the
 shared library.

Package: lib32go24
Description-md5: 7174520aedfeba49e54b8c36f55b7e95
Description-en: Runtime library for GNU Go applications (32bit)
 Library needed for GNU Go applications linked against the
 shared library.

Package: lib32gomp1
Description-md5: e631a6bc5701a04082ff06d4907faecf
Description-en: GCC OpenMP (GOMP) support library (32bit)
 GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
 in the GNU Compiler Collection.

Package: lib32itm1
Description-md5: dab7174f3ba5f3317b7d12b57522f05a
Description-en: GNU Transactional Memory Library (32bit)
 GNU Transactional Memory Library (libitm) provides transaction support for
 accesses to the memory of a process, enabling easy-to-use synchronization of
 accesses to shared memory by several threads.

Package: lib32quadmath0
Description-md5: d7a03dac94565e412ed600a16f543d54
Description-en: GCC Quad-Precision Math Library (32bit)
 A library, which provides quad-precision mathematical functions on targets
 supporting the __float128 datatype. The library is used to provide on such
 targets the REAL(16) type in the GNU Fortran compiler.

Package: lib32stdc++-15-dev
Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e
Description-en: GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: lib32stdc++6
Description-md5: 2124b81bef171d19a7c047c58ae7058f
Description-en: GNU Standard C++ Library v3 (32 bit Version)
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.

Package: lib32ubsan1
Description-md5: 00c57d4ccf298e90fae6bd6acdfad7ab
Description-en: UBSan -- undefined behaviour sanitizer (32bit)
 UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
 Various computations will be instrumented to detect undefined behavior
 at runtime. Available for C and C++.

Package: libasan8
Description-md5: 04e20d522e263c6563c2ea719c87026f
Description-en: AddressSanitizer -- a fast memory error detector
 AddressSanitizer (ASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.

Package: libasprintf-dev
Description-md5: cf1fef7ad5efe4699246499cc22d4b78
Description-en: use fprintf and friends in C++ - static libraries and headers
 This package contains development files for the libasprintf library.

Package: libasprintf0v5
Description-md5: 219cd3f952d632bf9709be3cec1ed64c
Description-en: use fprintf and friends in C++ - shared library
 This package contains the libasprintf shared library which makes the
 C formatted output routines (fprintf et al.) usable in C++ programs,
 for use with the <string> strings and the <iostream> streams.

Package: libatomic1
Description-md5: 16938852526fc26bdbcb46c18435ed08
Description-en: support library providing __atomic built-in functions
 library providing __atomic built-in functions. When an atomic call cannot
 be turned into lock-free instructions, GCC will make calls into this library.

Package: libauthen-sasl-perl
Description-md5: a3424e8b11b349db79d78bd4ac190a5d
Description-en: Authen::SASL - SASL Authentication framework
 SASL is a generic mechanism for authentication used by several network
 protocols. Authen::SASL provides an implementation framework that all
 protocols should be able to share.
 .
 The framework allows different implementations of the connection class
 to be plugged in. At the time of writing there were two such plugins
 in Debian:
  - Authen::SASL::Perl (in this package)
    This module implements several mechanisms and is implemented
    entirely in Perl.
  - Authen::SASL::XS (in the libauthen-sasl-xs-perl package)
    This module uses the Cyrus SASL C-library (both version 1 and 2 are
    supported).

Package: libavahi-client-dev
Description-md5: 70b3114997bfcd9053f7bf3f89550ef9
Description-en: Development files for the Avahi client library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the development headers for Avahi's C API which
 allows you to integrate mDNS/DNS-SD functionality into your application.

Package: libavahi-client3
Description-md5: 23a3240e3fa4fb5375126d82ae53d14b
Description-en: Avahi client library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the library for Avahi's C API which  allows you
 to integrate mDNS/DNS-SD functionality into your application.

Package: libavahi-common-data
Description-md5: 7262221e9aafb47f2911e3153296fab1
Description-en: Avahi common data files
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains common data files for avahi.

Package: libavahi-common-dev
Description-md5: 2bd45c44b0f13fa2319c808bd7de79e5
Description-en: Development files for the Avahi common library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the development headers for the Avahi common
 library, which is a set of common functions and definitions used by many
 of Avahis components and client applications.

Package: libavahi-common3
Description-md5: bbc06dc3aaf84439dd323000d2524550
Description-en: Avahi common library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the Avahi common library, which is a set of common
 functions used by many of Avahis components and client applications.

Package: libavahi-compat-libdnssd-dev
Description-md5: b649eb808a8fb7e872951939f15bc53f
Description-en: Development headers for the Avahi Apple Bonjour compatibility library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the development headers for Apple Bonjour compatibility
 library of Avahi.

Package: libavahi-compat-libdnssd1
Description-md5: b65a9302d5f5a107a6de3804ec9351c4
Description-en: Avahi Apple Bonjour compatibility library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This library contains the Apple Bonjour compatibility library of Avahi.

Package: libavahi-core-dev
Description-md5: 81c0631445a9e6d01f1963cb18195bdf
Description-en: Development files for Avahi's embeddable mDNS/DNS-SD library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the development files for Avahi's embeddable
 mDNS/DNS-SD stack. This can be used by embedded application developers
 to integrate mDNS/DNS-SD functionality into their applications.
 .
 You should not however use this library for non-embedded applications, you
 should use libavahi-client-dev which interacts with the avahi daemon.

Package: libavahi-core7
Description-md5: 22b9d09fb6eef6b3d23199e3164eb87c
Description-en: Avahi's embeddable mDNS/DNS-SD library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the library for Avahi's embeddable mDNS/DNS-SD stack.
 This can be used by embedded applications to integrate mDNS/DNS-SD
 functionality into their applications.
 .
 You should not however use this library for non-embedded applications, you
 should use libavahi-client which interacts with the avahi daemon.

Package: libavahi-glib-dev
Description-md5: c53bef724d42cfdb907059e698dd69b5
Description-en: Development headers for the Avahi GLib integration library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the development headers for the interface
 to integrate the Avahi libraries  into a GLib main loop application,
 including GTK+ applications.

Package: libavahi-glib1
Description-md5: 81eecad87a5c1892fe68f50918d70247
Description-en: Avahi GLib integration library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This library contains the interface to integrate the Avahi libraries
 into a GLib main loop application, including GTK+ applications.

Package: libavahi-gobject-dev
Description-md5: b53a4bd17d9a35135092d4ba964682db
Description-en: Development headers for the Avahi GObject library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the development headers for a GObject interface
 to Avahi

Package: libavahi-gobject0
Description-md5: 44a1978a9ae30e9695613c7683efa9b0
Description-en: Avahi GObject library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This library contains the GObject wrapper for Avahi.

Package: libavahi-ui-gtk3-0
Description-md5: 55a81fa77d7687e44f84d058e85c4486
Description-en: Avahi GTK+ User interface library for GTK3
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This library contains a GTK+ widget for browsing services.

Package: libavahi-ui-gtk3-dev
Description-md5: 93b46403f0b56ce77c0111c4f8b14d40
Description-en: Development headers for the Avahi GTK+ User interface library
 Avahi is a fully LGPL framework for Multicast DNS Service Discovery.
 It allows programs to publish and discover services and hosts
 running on a local network with no specific configuration. For
 example you can plug into a network and instantly find printers to
 print to, files to look at and people to talk to.
 .
 This package contains the development headers for the GTK+ library of Avahi.

Package: libbinutils
Description-md5: 4b87c5b499514b3b039e5d7ef54f2682
Description-en: GNU binary utilities (private shared library)
 This package includes the private shared libraries libbfd and libopcodes.

Package: libbinutils-dbg
Description-md5: 0425bdd565e0f24ff26574c29f636dc0
Description-en: GNU binary utilities (private shared library, debug symbols)
 This package provides debug symbols for libbinutils.

Package: libbpf-dev
Description-md5: ebc34420621f1d340dda3a2cc4306fbc
Description-en: eBPF helper library (development files)
 libbpf is a library for loading eBPF programs and reading and
 manipulating eBPF objects from user-space.
 .
 This package is needed to compile programs against libbpf.

Package: libbpf1
Description-md5: 9e65db5c450ca9fddd236083a364e366
Description-en: eBPF helper library (shared library)
 libbpf is a library for loading eBPF programs and reading and
 manipulating eBPF objects from user-space.
 .
 This package contains the shared library.

Package: libbz2-1.0
Description-md5: 88cb63f2e4d8cedcf07307314fc3c3d3
Description-en: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).

Package: libbz2-dev
Description-md5: 29019be384cd4282e28fdd9912de5585
Description-en: high-quality block-sorting file compressor library - development
 Static libraries and include files for the bzip2 compressor library.
 .
 bzip2 is a freely available, patent free, data compressor.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).

Package: libcc1-0
Description-md5: d8a62f43eef344a718f9c7152d75d70c
Description-en: GCC cc1 plugin for GDB
 libcc1 is a plugin for GDB.

Package: libclang-cpp20
Description-md5: 8acc7c5b41666c14f1ef5e79310225e6
Description-en: C++ interface to the Clang library
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang C++ library.
 .
 The C++ Interface to Clang provides an API that exposes
 facilities for parsing source code into an abstract syntax tree (AST),
 loading already-parsed ASTs, traversing the AST, associating physical source
 locations with elements within the AST, and other facilities that support
 Clang-based development tools.

Package: libclang1-20
Description-md5: 6fbabc5fd121a4ff6b254de59627b6de
Description-en: C interface to the Clang library
 Clang project is a C, C++, Objective C and Objective C++ front-end
 based on the LLVM compiler. Its goal is to offer a replacement to the
 GNU Compiler Collection (GCC).
 .
 Clang implements all of the ISO C++ 1998, 11, 14 and 17 standards and also
 provides most of the support of C++20.
 .
 This package contains the Clang library.
 .
 The C Interface to Clang provides a relatively small API that exposes
 facilities for parsing source code into an abstract syntax tree (AST),
 loading already-parsed ASTs, traversing the AST, associating physical source
 locations with elements within the AST, and other facilities that support
 Clang-based development tools.

Package: libcom-err2
Description-md5: 5611f795c9947cfb9a2980a01506a1b9
Description-en: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.

Package: libctf-nobfd0
Description-md5: d6c110768780803ec3b63b3cfd3fefa3
Description-en: Compact C Type Format library (runtime, no BFD dependency)
 This package includes the libctf-nobfd shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program

Package: libctf-nobfd0-dbg
Description-md5: dd801c6e69e4fc0ad925f6a62b61ed07
Description-en: Compact C Type Format library (debug symbols, no BFD dependency)
 This package includes the libctf-nobfd shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program

Package: libctf0
Description-md5: 72ceed17da4170356ec78923ed0461d3
Description-en: Compact C Type Format library (runtime, BFD dependency)
 This package includes the libctf shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program

Package: libctf0-dbg
Description-md5: 5d13fc1067470af9e1868851895be93e
Description-en: Compact C Type Format library (debug symbols, BFD dependency)
 This package includes the libctf shared library.  The Compact C Type
 Format (CTF) is a way of representing information about a binary program

Package: libdbus-1-3
Description-md5: ea868cc8f9762fbcb9f449cc8b3a7a62
Description-en: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The message bus daemon can be found in the dbus-daemon package.

Package: libdbus-1-dev
Description-md5: 59e71e7e764b950dc1184788af416a7e
Description-en: simple interprocess messaging system (development headers)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 See the dbus description for more information about D-Bus in general.

Package: libext2fs-dev
Description-md5: 6c413fbf2fbe007c87112b744560fc94
Description-en: ext2/ext3/ext4 file system libraries - headers and static libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains the development environment for the ext2fs and e2p
 libraries.

Package: libext2fs2t64
Description-md5: ba4f61a3e0b238831f03143cbdce696e
Description-en: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.

Package: libga68-1
Description-md5: 5b7e5135ff8b2edbf39411219e7e6434
Description-en: GNU Algol 68 standard library (runtime library)
 This is the GNU Algol 68 standard library that comes with the ga68 compiler.

Package: libga68-15-dev
Description-md5: 9574aee072e6e6899fe754ed2347c9c0
Description-en: GNU Algol 68 standard library
 This is the Algol 68 standard library that comes with the ga68 compiler.

Package: libgail-3-0t64
Description-md5: 280470c176632353e001009f5036985a
Description-en: GNOME Accessibility Implementation Library -- shared libraries
 Gail implements ATK interfaces for GTK widgets which are dynamically
 loadable at runtime by a GTK application. Once loaded, those parts of
 an application that use standard GTK widgets will have a basic level
 of accessibility, without the need to modify the application at all.
 .
 This package contains the shared library.

Package: libgail-3-dev
Description-md5: 5edeb3765ab0b94a94768d0af3525056
Description-en: GNOME Accessibility Implementation Library -- development files
 Gail implements ATK interfaces for GTK widgets which are dynamically
 loadable at runtime by a GTK application. Once loaded, those parts of
 an application that use standard GTK widgets will have a basic level
 of accessibility, without the need to modify the application at all.
 .
 This package contains the development files for Gail.

Package: libgail-3-doc
Description-md5: 03b2e3edb9cd3a2f6e5b5a06f8d6e8cc
Description-en: documentation files of the Gail library
 Gail implements ATK interfaces for GTK widgets which are dynamically
 loadable at runtime by a GTK application. Once loaded, those parts of
 an application that use standard GTK widgets will have a basic level
 of accessibility, without the need to modify the application at all.
 .
 This package contains the documentation files for Gail.

Package: libgcc-14-dev
Description-md5: 4ab7cb439b47e1d0796fbaf8447229ac
Description-en: GCC support library (development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.

Package: libgcc-15-dev
Description-md5: 4ab7cb439b47e1d0796fbaf8447229ac
Description-en: GCC support library (development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.

Package: libgcc-s1
Description-md5: bbd60d723e97d8e06c04228ee4c76f10
Description-en: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.

Package: libgcobol-15-dev
Description-md5: 1beb62506c556ed87d0ba541f9ba4f3b
Description-en: GNU COBOL standard library
 This is the COBOL standard library that comes with the gcobol compiler.

Package: libgcobol1
Description-md5: c971f050ff5daf13bb63cc1de52ddabd
Description-en: GNU COBOL standard library (runtime library)
 This is the GNU COBOL standard library that comes with the gcobol compiler.

Package: libgdiagnostics-15-dev
Description-md5: 3b982c26f4b6aa3b430c9b0e3fbf47cd
Description-en: GCC diagnostic-handling code wrapped into a library (development files)
 GCCs diagnostic-handling code covers things like
  - quoting pertinent source code (with a cache)
  - underlining points and ranges in the source code, possibly with labels
  - emitting fix-it hints
  - generating patches from fix-it hints
  - SARIF output

Package: libgdiagnostics0
Description-md5: 823b01659af7e2a32d4932733dc7cf70
Description-en: GCC diagnostic-handling code wrapped into a library (shared library)
 GCCs diagnostic-handling code covers things like
  - quoting pertinent source code (with a cache)
  - underlining points and ranges in the source code, possibly with labels
  - emitting fix-it hints
  - generating patches from fix-it hints
  - SARIF output

Package: libgettextpo-dev
Description-md5: 9e10b083de4abd01e0722086aa10698d
Description-en: process PO files - static libraries and headers
 This package contains development files for the libgettextpo library.

Package: libgettextpo0
Description-md5: 20ba3999bd6531593d7a4b9c7b10bc14
Description-en: process PO files - shared library
 This package contains the libgettextpo shared library for interfacing
 programmatically with GNU gettext .po files.

Package: libgfortran-15-dev
Description-md5: 146f5739f84c8211389d84c7aa5bf949
Description-en: Runtime library for GNU Fortran applications (development files)
 This package contains the headers and static library files needed to build
 GNU Fortran applications.

Package: libgfortran5
Description-md5: bb4b9e7dbbaa67e95441936718b11f39
Description-en: Runtime library for GNU Fortran applications
 Library needed for GNU Fortran applications linked against the
 shared library.

Package: libgio-2.0-dev
Description-md5: 9a7ce86f9cc5bfa3f95bff6d433aed17
Description-en: Development files for the GLib, GObject and GIO libraries
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK, GIMP, and GNOME.
 .
 This package contains development files for the main libraries included
 in the upstream GLib package:
 .
  * GLib: the core library with data structures and utilities
  * GThread: multi-threading support
  * GModule: dynamically-loadable modules
  * GObject: the object system
  * GIO: higher-level utilities built on GObject
 .
 The libglib2.0-dev package provides a more complete set of development
 files.

Package: libgio-2.0-dev-bin
Description-md5: 6feec5e34cfe70ffe483a150d1abcf8a
Description-en: Development utilities for GLib, GObject and GIO libraries
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK, GIMP, and GNOME.
 .
 This package contains several developer-oriented command-line tools
 used when compiling packages that use GLib:
 .
  * gdbus-codegen
  * glib-compile-resources
  * glib-genmarshal
  * glib-gettextize
  * glib-mkenums
  * gobject-query
  * gtester (deprecated)
  * gtester-report (deprecated)
 .
 Other command-line tools can be found in the libglib2.0-bin package.
 .
 If the non-architecture-prefixed versions of the gi-compile-repository,
 gi-decompile-typelib and gi-inspect-typelib tools are required, please
 install the libglib2.0-dev package, but consider using the
 architecture-prefixed versions in the girepository-tools package instead.

Package: libgirepository-2.0-0
Description-md5: affc8d6f4ac284342f4f650559090e49
Description-en: GLib runtime library for handling GObject introspection data
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared library used by language bindings such
 as PyGObject and gjs to call GObject methods.

Package: libgirepository-2.0-dev
Description-md5: 9313f335ccc0dff978cbb0cb3de2c8ef
Description-en: Development files for the GObject introspection library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed to compile programs against libgirepository-2.0-0.
 .
 GObject-Introspection metadata for this library is not included here, and
 can be found in the gir1.2-girepository-3.0-dev package.

Package: libglib2.0-0t64
Description-md5: f44de6293be1aa02cd13d73f591580a9
Description-en: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.

Package: libglib2.0-bin
Description-md5: 0f7421bfdb5f46c0b8e82a359df1ab1a
Description-en: Programs for the GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains command-line utilities associated with GLib,
 including:
 .
  * gapplication, a client for starting applications via D-Bus activation
  * gdbus, a tool for working with D-Bus objects and monitoring the bus
  * gio, a file management utility that can work with GIO virtual filesystems
  * gresource, which can extract resources from libraries and executables
  * gsettings, a tool for inspecting and editing application configuration
  * gio-query-modules, which updates caches used internally by GLib
  * glib-compile-schemas, which updates caches used internally by GLib

Package: libglib2.0-data
Description-md5: e30141317e2f372da30c78d06ac076ee
Description-en: Common files for GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed for the runtime libraries to display messages in
 languages other than English.

Package: libglib2.0-dev
Description-md5: 7ea731a217a4cf465ca10ffa4d3167ae
Description-en: Development metapackage for the GLib family of libraries
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK, GIMP, and GNOME.
 .
 This package provides most of the development headers, libraries and
 utilities needed to compile GLib programs, and in most cases is the
 most appropriate package to use as a build-dependency.
 For lower-level packages that are involved in architecture bootstrapping,
 consider switching dependencies to libgio-2.0-dev.
 .
 GObject-Introspection metadata for this library is not included here, and
 can be found in the gir1.2-glib-2.0-dev package.

Package: libglib2.0-dev-bin
Description-md5: 716eb6847e618429b0a0a90ab6fd146a
Description-en: Development utilities for the GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed to compile programs against libglib2.0-0. It contains
 development utilities typically run during compilation and should not be
 installed directly. Use libglib2.0-dev instead.

Package: libglib2.0-doc
Description-md5: bdb9aa53f83dabd5dab7d58c0e8cd803
Description-en: Documentation files for the GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the HTML documentation for the GLib library
 in /usr/share/doc/libglib2.0-doc/ .

Package: libgnome-bg-4-2t64
Description-md5: 772bba653069fbbcbcf25242289a6893
Description-en: Utility library for background images - runtime files
 The gnome-desktop set of libraries provides various utility functions
 that are used in multiple components of the GNOME desktop, but do not
 have a sufficiently stable API to be included in core libraries such
 as GLib and GTK.
 .
 This library provides utilities for managing background images (wallpaper).

Package: libgnome-bg-4-dev
Description-md5: 2af47c9a5c6a69e0092eba535e0417bf
Description-en: Background image library for GNOME - development files (GTK 4)
 The gnome-desktop set of libraries provides various utility functions
 that are used in multiple components of the GNOME desktop, but do not
 have a sufficiently stable API to be included in core libraries such
 as GLib and GTK.
 .
 This package contains development files to compile programs that deal with
 background images.

Package: libgnome-desktop-3-20t64
Description-md5: 2c0b9e42fb212eff6defaca1564fa194
Description-en: Utility library for the GNOME desktop - GTK 3 version
 This library provides various utility functions that are used in multiple
 components of the GNOME desktop, but do not have a sufficiently stable API
 to be included in core libraries such as GLib and GTK.
 .
 This package provides a legacy GTK-3-based library with functionality
 similar to a combination of libgnome-bg-4-2t64, libgnome-desktop-4-2t64
 and libgnome-rr-4-2t64, for compatibility with older GNOME components.

Package: libgnome-desktop-3-dev
Description-md5: 8b6bcc623524b9a310c69421d9a68a7f
Description-en: Utility library for the GNOME desktop - development files (GTK 3)
 This package provides the include files and static library for the GNOME
 desktop library functions.

Package: libgnome-desktop-4-2t64
Description-md5: fa3fa336c77e0fb7f58a288ae9b077a3
Description-en: Utility library for the GNOME desktop - runtime files
 The gnome-desktop set of libraries provides various utility functions
 that are used in multiple components of the GNOME desktop, but do not
 have a sufficiently stable API to be included in core libraries such
 as GLib and GTK.
 .
 This library provides miscellaneous non-GUI utilities, including
 sandboxed image thumbnailing, localization-related utilities, idle time
 monitoring, a simplified interface to the udev hardware database,
 putting processes into systemd scopes, user-facing time representation
 and keyboard layout information.

Package: libgnome-desktop-4-dev
Description-md5: 0b146d170235dcc0f5feb070a024c332
Description-en: Utility library for the GNOME desktop - development files (GTK 4)
 The gnome-desktop set of libraries provides various utility functions
 that are used in multiple components of the GNOME desktop, but do not
 have a sufficiently stable API to be included in core libraries such
 as GLib and GTK.
 .
 This package contains development files to compile programs that use
 miscellaneous non-GUI utility functions.

Package: libgnome-desktop-doc
Description-md5: c5b7f6d390502465a66094c2ed1cc88d
Description-en: API documentation for libgnome-desktop
 The gnome-desktop set of libraries provides various utility functions
 that are used in multiple components of the GNOME desktop, but do not
 have a sufficiently stable API to be included in core libraries such
 as GLib and GTK.
 .
 This package contains API documentation, currently only available for
 the GTK 3 version of the library.

Package: libgnome-rr-4-2t64
Description-md5: f90a0ee6ba4926613605501e6bbabe27
Description-en: Utility library for display information - runtime files
 The gnome-desktop set of libraries provides various utility functions
 that are used in multiple components of the GNOME desktop, but do not
 have a sufficiently stable API to be included in core libraries such
 as GLib and GTK.
 .
 This library provides utilities for display mode-setting, resizing and
 rotation using the XRandR protocol or Wayland.

Package: libgnome-rr-4-dev
Description-md5: 3677a9b32be6c70623bf4a3afc68e318
Description-en: Display information library for GNOME - development files (GTK 4)
 The gnome-desktop set of libraries provides various utility functions
 that are used in multiple components of the GNOME desktop, but do not
 have a sufficiently stable API to be included in core libraries such
 as GLib and GTK.
 .
 This package contains development files to compile programs that deal with
 display modes.

Package: libgnutls-dane0t64
Description-md5: f54d1a37430965b4aabea6b30ac9ad5b
Description-en: GNU TLS library - DANE security support
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the runtime library for DANE (DNS-based Authentication
 of Named Entities) support.

Package: libgnutls-openssl27t64
Description-md5: cc3138ac587efbd57933152c18168024
Description-en: GNU TLS library - OpenSSL wrapper
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the runtime library of the GnuTLS OpenSSL wrapper.

Package: libgnutls28-dev
Description-md5: 6baa023d298b1250826dc2baac8acd8b
Description-en: GNU TLS library - development files
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the GnuTLS development files.

Package: libgnutls30t64
Description-md5: 62280ac2a597a21eda709c611a5c0008
Description-en: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2, 1.3) and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - certificate path validation, as well as DANE and trust on first use.
  - the Online Certificate Status Protocol (OCSP).
  - public key methods, including RSA and Elliptic curves, as well as password
    and key authentication methods such as SRP and PSK protocols.
  - all the strong encryption algorithms, including AES and Camellia.
  - CPU-assisted cryptography with VIA padlock and AES-NI instruction sets.
  - HSMs and cryptographic tokens, via PKCS #11.
 .
 This package contains the main runtime library.

Package: libgo-14-dev
Description-md5: 20a30e1e0e326264783897d4692e3ada
Description-en: Runtime library for GNU Go applications (development files)
 This package contains the headers and static library files needed to build
 GNU Go applications.

Package: libgo-15-dev
Description-md5: 20a30e1e0e326264783897d4692e3ada
Description-en: Runtime library for GNU Go applications (development files)
 This package contains the headers and static library files needed to build
 GNU Go applications.

Package: libgo23
Description-md5: 9dac71a6885be90d89c8d4e0ae4b9f2c
Description-en: Runtime library for GNU Go applications
 Library needed for GNU Go applications linked against the
 shared library.

Package: libgo24
Description-md5: 9dac71a6885be90d89c8d4e0ae4b9f2c
Description-en: Runtime library for GNU Go applications
 Library needed for GNU Go applications linked against the
 shared library.

Package: libgomp1
Description-md5: 9651123458dd1bf3c162dfb6a6292ff4
Description-en: GCC OpenMP (GOMP) support library
 GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
 in the GNU Compiler Collection.

Package: libgprofng0
Description-md5: f46052f9dacaacc2ef39ad7058167163
Description-en: GNU Next Generation profiler (runtime library)
 Gprofng is the GNU Next Generation profiler for analyzing the performance
 of Linux applications.  Gprofng allows you to:
 .
  - Profile C / C++ / Java / Scala applications without needing to recompile
  - Profile multi-threaded applications
  - Analyze and compare multiple experiments
  - Use time-based sampling and / or hardware event counters
 .
 This package includes the libgprofng shared library.

Package: libgprofng0-dbg
Description-md5: 0d2cc31ed55dc41aac8631b189966fa8
Description-en: GNU Next Generation profiler (debug symbols)
 Gprofng is the GNU Next Generation profiler for analyzing the performance
 of Linux applications.
 .
 This package includes the debug symbols for the libgprofng shared library.

Package: libgraphite2-3
Description-md5: 68d1591bf212ce8230272a42a5738b72
Description-en: Font rendering engine for Complex Scripts -- library
 Graphite is a system that can be used to create and use "smart fonts" capable
 of displaying writing systems with various complex behaviors, such as:
 contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
 stacking diacritics and complex positioning.
 .
 This library was designed and developed by the NRSI (Non-Roman Script
 Initiative) within SIL International (www.sil.org) to act as a complement to
 other smart font rendering technologies with limited practical local
 extensibility. Its purpose is to help meet the needs of a very large number
 of "minority language" communities for local extensibility of complex script
 behaviors.
 .
 The behavior of the rendering engine for a given writing system is specified
 through extra tables added to a TrueType font.  These tables are generated by
 compiling a GDL (Graphite Description Language) source file into a font using
 grcompiler.
 .
 This package contains the shared library.

Package: libgraphite2-dev
Description-md5: 7f19707ec760b78fb24460b38ecf78bd
Description-en: Development files for libgraphite2
 Graphite is a system that can be used to create and use "smart fonts" capable
 of displaying writing systems with various complex behaviors, such as:
 contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
 stacking diacritics and complex positioning.
 .
 This library was designed and developed by the NRSI (Non-Roman Script
 Initiative) within SIL International (www.sil.org) to act as a complement to
 other smart font rendering technologies with limited practical local
 extensibility. Its purpose is to help meet the needs of a very large number
 of "minority language" communities for local extensibility of complex script
 behaviors.
 .
 The behavior of the rendering engine for a given writing system is specified
 through extra tables added to a TrueType font.  These tables are generated by
 compiling a GDL (Graphite Description Language) source file into a font using
 grcompiler.
 .
 This package contains the development libraries for libgraphite2

Package: libgraphite2-doc
Description-md5: b0b3ea4dd05ea53f9d34d1f006dde09b
Description-en: Documentation for libgraphite2
 Graphite is a system that can be used to create and use "smart fonts" capable
 of displaying writing systems with various complex behaviors, such as:
 contextual shaping, ligatures, reordering, split glyphs, bidirectionality,
 stacking diacritics and complex positioning.
 .
 This library was designed and developed by the NRSI (Non-Roman Script
 Initiative) within SIL International (www.sil.org) to act as a complement to
 other smart font rendering technologies with limited practical local
 extensibility. Its purpose is to help meet the needs of a very large number
 of "minority language" communities for local extensibility of complex script
 behaviors.
 .
 The behavior of the rendering engine for a given writing system is specified
 through extra tables added to a TrueType font.  These tables are generated by
 compiling a GDL (Graphite Description Language) source file into a font using
 grcompiler.
 .
 PDF and HTML documentation for libgraphite2

Package: libgstreamer1.0-0
Description-md5: f08b5d59945781d0a8d4897e45d5a847
Description-en: Core GStreamer libraries and elements
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains the core library and elements.

Package: libgstreamer1.0-dev
Description-md5: de1692260510350a48f76ec91eae40a9
Description-en: GStreamer core development files
 GStreamer is a streaming media framework, based on graphs of filters
 which operate on media data.  Applications using this library can do
 anything from real-time sound processing to playing videos, and just
 about anything else media-related.  Its plugin-based architecture means
 that new data types or processing capabilities can be added simply by
 installing new plug-ins.
 .
 This package contains development files for the core library and
 elements.

Package: libgtk-3-0t64
Description-md5: 02e4be37fe9843eb98242e33800e4fb6
Description-en: GTK graphical user interface library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the shared libraries.

Package: libgtk-3-bin
Description-md5: 056ac7d3074cbdd205e955c8d8589cdd
Description-en: programs for the GTK graphical user interface library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the utilities which are used by the libraries
 and other packages.

Package: libgtk-3-common
Description-md5: 80ace64c76aad30366eb036871cfaf48
Description-en: common files for the GTK graphical user interface library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the common files which the libraries need.

Package: libgtk-3-dev
Description-md5: 4fe57949589093654313cc79d6da8008
Description-en: development files for the GTK library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the header and development files which are
 needed for building GTK applications.

Package: libgtk-3-doc
Description-md5: 28495bcace073ee089194a1ff2abae27
Description-en: documentation for the GTK graphical user interface library
 GTK is a multi-platform toolkit for creating graphical user
 interfaces. Offering a complete set of widgets, GTK is suitable
 for projects ranging from small one-off tools to complete application
 suites.
 .
 This package contains the HTML documentation for the GTK library
 in /usr/share/doc/libgtk-3-doc/ .

Package: libhwasan0
Description-md5: 3e86044294569fc681ceeaf4424622e4
Description-en: AddressSanitizer -- a fast memory error detector
 AddressSanitizer (HWASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.

Package: libibus-1.0-5
Description-md5: 2974af303686a482e53184d8b1f0add7
Description-en: Intelligent Input Bus - shared library
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains the shared library.

Package: libibus-1.0-dev
Description-md5: 90767d47bc8a96a7e5f705c5b19a9d1f
Description-en: Intelligent Input Bus - development file
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains the header files and static libraries which are
 needed for developing the IBus applications.

Package: libitm1
Description-md5: 353dc4001cbe783e9f0a27c29f5dc3b5
Description-en: GNU Transactional Memory Library
 GNU Transactional Memory Library (libitm) provides transaction support for
 accesses to the memory of a process, enabling easy-to-use synchronization of
 accesses to shared memory by several threads.

Package: libjavascriptcoregtk-4.1-0
Description-md5: ba37ae47b0068c9a4e9c35479c706b65
Description-en: JavaScript engine library from WebKitGTK
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.1).
 .
 This package contains the shared libraries.

Package: libjavascriptcoregtk-4.1-dev
Description-md5: 43ba6fffaaecf506204f5048bde381f8
Description-en: JavaScript engine library from WebKitGTK - development files
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 4.1).
 .
 This package contains the development files.

Package: libjavascriptcoregtk-6.0-1
Description-md5: ab8f9a4b67ac6714fcbb46da1b172212
Description-en: JavaScript engine library from WebKitGTK
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 6.0).
 .
 This package contains the shared libraries.

Package: libjavascriptcoregtk-6.0-dev
Description-md5: 21fff7684df76d97f1f19c5619776f78
Description-en: JavaScript engine library from WebKitGTK - development files
 JavaScriptCore is the JavaScript engine used in WebKit. It consists
 of the following building blocks: lexer, parser, start-up interpreter
 (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a
 high-throughput optimizing JIT (FTL).
 .
 This build comes from the GTK port of WebKit (API version 6.0).
 .
 This package contains the development files.

Package: libjs-jquery
Description-md5: c8b22b976a623a2bd39ace0d8c51066f
Description-en: JavaScript library for dynamic web applications
 jQuery is a fast, concise, JavaScript Library
 that simplifies how you traverse HTML documents, handle events,
 perform animations, and add Ajax interactions to your web pages.
 jQuery is designed to change the way that you write JavaScript.

Package: libllvm20
Description-md5: a8854f4edf76a8c14ce34dc209bd1d11
Description-en: Modular compiler and toolchain technologies, runtime library
 LLVM is a collection of libraries and tools that make it easy to build
 compilers, optimizers, just-in-time code generators, and many other
 compiler-related programs.
 .
 This package contains the LLVM runtime library.

Package: libllvmlibc-20-dev
Description-md5: b678725717171e9f1656f9727ef63f83
Description-en: LLVM C Library - dev package
 Implementation of the C standard library targeting C17 and above.
 .
 This is an experimental project. Don't use in production.

Package: liblsan0
Description-md5: fd77936d8cda7d6af8bc33d6f395c678
Description-en: LeakSanitizer -- a memory leak detector (runtime)
 LeakSanitizer (Lsan) is a memory leak detector which is integrated
 into AddressSanitizer.

Package: libmagic-dev
Description-md5: 93c5eb9eca91d43fe4e08b91dec0e076
Description-en: Recognize the type of data in a file using "magic" numbers - development
 This library can be used to classify files according to magic number
 tests.
 .
 This package contains the development files.

Package: libmagic-mgc
Description-md5: 887ab33ee2130c4cf995b3e298de4ef2
Description-en: File type determination library using "magic" numbers (compiled magic file)
 This package provides the compiled magic file "magic.mgc". It has
 been separated from libmagic1t64 in order to meet the multiarch
 requirements without breaking applications that expect this file
 at its absolute path.

Package: libmagic1t64
Description-md5: 7c626dcc59dd225f2ce4a3522fed96e2
Description-en: Recognize the type of data in a file using "magic" numbers - library
 This library can be used to classify files according to magic number
 tests. It implements the core functionality of the file command.

Package: libnftables-dev
Description-md5: ac9e13fe39146b723a765f1a5a6e0312
Description-en: Development files for libnftables
 This library provides high level semantics to interact with the nftables
 framework by Netfilter project.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
 .
 This package provides development files and static libraries.

Package: libnftables1
Description-md5: a0142ceed355e6d73013884cbcfb0491
Description-en: Netfilter nftables high level userspace API library
 This library provides high level semantics to interact with the nftables
 framework by Netfilter project.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.
 .
 This package contains the libnftables library.

Package: liboffload-20
Description-md5: 841bdc20a27b40722e37c7b2d0838a75
Description-en: Offload Library
 The offload library facilitates efficient task distribution by offloading
 specific computational tasks from the CPU to alternative hardware accelerators
 such as GPUs or FPGAs.

Package: liboffload-20-dev
Description-md5: 352e5b2eb6f0446d5039b547a7bc6d17
Description-en: Offload Library - Development Package
 The offload library facilitates efficient task distribution by offloading
 specific computational tasks from the CPU to alternative hardware accelerators
 such as GPUs or FPGAs.
 .
 This development package includes headers and other resources needed for building
 applications that utilize the offload runtime.

Package: libomp5-20
Description-md5: e28f50eb4beb8e316b69da2c1c0194c3
Description-en: LLVM OpenMP runtime
 The runtime is the part of the OpenMP implementation that your code is
 linked against, and that manages the multiple threads in an OpenMP program
 while it is executing.

Package: libquadmath0
Description-md5: fb375c278b15a5774cef34cf9570ecc9
Description-en: GCC Quad-Precision Math Library
 A library, which provides quad-precision mathematical functions on targets
 supporting the __float128 datatype. The library is used to provide on such
 targets the REAL(16) type in the GNU Fortran compiler.

Package: libsframe-dev
Description-md5: 47f3562091188aa0f476c28a648e3922
Description-en: Library to handle the SFrame format (development files)
 SFrame stands for Simple Frame format.  SFrame format keeps track
 of the minimal necessary information needed for generating stack traces.
 .
 This package includes the libsframe header files and static library.

Package: libsframe2
Description-md5: f1d30eda4ea5698212dcbe88096d5ce1
Description-en: Library to handle the SFrame format (runtime library)
 SFrame stands for Simple Frame format.  SFrame format keeps track
 of the minimal necessary information needed for generating stack traces.
 .
 This package includes the libsframe shared library.

Package: libsframe2-dbg
Description-md5: 34f0572cb0763bbd4dcaf952559f8c27
Description-en: Library to handle the SFrame format (debug symbols)
 SFrame stands for Simple Frame format.  SFrame format keeps track
 of the minimal necessary information needed for generating stack traces.
 .
 This package includes the debug symbols for the libsframe shared library.

Package: libss2
Description-md5: d3d9f89af5755a413e24d2dc0cb7df81
Description-en: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.

Package: libssl-dev
Description-md5: 27044468897c45b271f879c7c6e135fe
Description-en: Secure Sockets Layer toolkit - development files
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains development libraries, header files, and manpages for libssl
 and libcrypto.

Package: libssl-doc
Description-md5: 863c8f0d45ab34415ebc295c04753c98
Description-en: Secure Sockets Layer toolkit - development documentation
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains manpages and demo files for libssl and libcrypto.

Package: libssl3t64
Description-md5: 88547c6206c7fbc4fcc7d09ce100d210
Description-en: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.

Package: libstdc++-14-dev
Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e
Description-en: GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: libstdc++-14-doc
Description-md5: 1a4b88b8d9f96dfb2ac2be1049b4db01
Description-en: GNU Standard C++ Library v3 (documentation files)
 This package contains documentation files for the GNU stdc++ library.
 .
 One set is the distribution documentation, the other set is the
 source documentation including a namespace list, class hierarchy,
 alphabetical list, compound list, file list, namespace members,
 compound members and file members.

Package: libstdc++-14-pic
Description-md5: 1b398e74a3b20401a8669d8c6472c7cc
Description-en: GNU Standard C++ Library v3 (shared library subset kit)
 This is used to develop subsets of the libstdc++ shared libraries for
 use on custom installation floppies and in embedded systems.
 .
 Unless you are making one of those, you will not need this package.

Package: libstdc++-15-dev
Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e
Description-en: GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: libstdc++-15-doc
Description-md5: 1a4b88b8d9f96dfb2ac2be1049b4db01
Description-en: GNU Standard C++ Library v3 (documentation files)
 This package contains documentation files for the GNU stdc++ library.
 .
 One set is the distribution documentation, the other set is the
 source documentation including a namespace list, class hierarchy,
 alphabetical list, compound list, file list, namespace members,
 compound members and file members.

Package: libstdc++6
Description-md5: 724ab84919e0e220afb960e36463914d
Description-en: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: libtsan2
Description-md5: 750c144e4cc79bcf76c58f43c882ff70
Description-en: ThreadSanitizer -- a Valgrind-based detector of data races (runtime)
 ThreadSanitizer (Tsan) is a data race detector for C/C++ programs.
 The Linux and Mac versions are based on Valgrind.

Package: libubsan1
Description-md5: 0d50b6d1808d18442db720f04627b846
Description-en: UBSan -- undefined behaviour sanitizer (runtime)
 UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
 Various computations will be instrumented to detect undefined behavior
 at runtime. Available for C and C++.

Package: libvirt-clients
Description-md5: ebf0adcee979a1fc0154c2925e1f6df0
Description-en: virtualization library - clients
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains virsh, a command line tool that can be used to
 control the libvirt daemon, as well as a few additional utilities.
 .
 Note that libvirt is fully network aware, meaning that it's possible to use
 the clients installed on the local machine to control a remote hypervisor
 host.

Package: libvirt-common
Description-md5: 18786928b63567f6a9f7e20c3b7f48f1
Description-en: virtualization library - common files
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains data files needed by the library.

Package: libvirt-daemon
Description-md5: f1e7330bb9acecba96883cafaacdded9
Description-en: virtualization daemon
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the libvirtd daemon, which needs to run on the
 hypervisor host.
 .
 Note that the daemon doesn't do anything useful on its own: connection
 drivers (e.g. libvirt-daemon-driver-qemu) have to be installed to give it
 the ability to create domains using various virtualization technologies,
 while secondary drivers (e.g. libvirt-daemon-driver-network) make it
 capable of managing other related resources.

Package: libvirt-daemon-common
Description-md5: bb15534ddc75f9c256177238a85ecbc0
Description-en: virtualization daemon - common files
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains data files needed by the various libvirt daemons.

Package: libvirt-daemon-config-network
Description-md5: fbab9c8484d9398cccf1c286114e62a1
Description-en: virtualization daemon - configuration files (default network)
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the configuration for the 'default' libvirt network.

Package: libvirt-daemon-config-nwfilter
Description-md5: e1fb148ff3e72823568d535b573529c1
Description-en: virtualization daemon - configuration files (default network filters)
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the configuration for the default set of nwfilters.

Package: libvirt-daemon-driver-interface
Description-md5: 499514db8833697bdc28f95d01bfe2ce
Description-en: virtualization daemon - interface driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the interface driver.

Package: libvirt-daemon-driver-network
Description-md5: 8f63c17d339e7dc70326bc5879a130df
Description-en: virtualization daemon - network driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the network driver.

Package: libvirt-daemon-driver-nodedev
Description-md5: 35c6a4d2b1a795283340e3bf3dc34d60
Description-en: virtualization daemon - node device (nodedev) driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the node device (nodedev) driver.

Package: libvirt-daemon-driver-nwfilter
Description-md5: 211faace7cd952e8e4630b34c07f41f4
Description-en: virtualization daemon - network filter (nwfilter) driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the network filter (nwfilter) driver.

Package: libvirt-daemon-driver-qemu
Description-md5: c2d4ef64bc876424b917fe7a09035280
Description-en: virtualization daemon - QEMU connection driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the QEMU connection driver.

Package: libvirt-daemon-driver-secret
Description-md5: d3453baa1260b14f32ca3aa52b4f4913
Description-en: virtualization daemon - secret driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the secret driver.

Package: libvirt-daemon-driver-storage
Description-md5: c49efd664e72fb5af3721f9342971712
Description-en: virtualization daemon - storage driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the storage driver, which includes the base
 functionality needed to access disk images stored on a local filesystem.

Package: libvirt-daemon-driver-storage-disk
Description-md5: 20263f9e119ddcf07948130be243cea8
Description-en: virtualization daemon - disk storage driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the storage driver that handles volumes as partitions
 of a physical disk.

Package: libvirt-daemon-driver-storage-iscsi
Description-md5: 07d56f19991d6c86a8e673725c1788e7
Description-en: virtualization daemon - iSCSI storage driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the storage driver for iSCSI volumes.

Package: libvirt-daemon-driver-storage-logical
Description-md5: 55fe494f52a7e3aab7337faabc21a71f
Description-en: virtualization daemon - Logical Volume Manager (LVM) storage driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the storage driver for volumes managed by Logical
 Volume Manager (LVM).

Package: libvirt-daemon-driver-storage-mpath
Description-md5: 676250d0ed39df45568ab019323bd8bd
Description-en: virtualization daemon - multipath (mpath) storage driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the storage driver for multipath (mpath) volumes.

Package: libvirt-daemon-driver-storage-scsi
Description-md5: 909aea0f7968e1d6a9b9234a81be494d
Description-en: virtualization daemon - SCSI storage driver
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the storage driver for local SCSI devices.

Package: libvirt-daemon-lock
Description-md5: 8cdc17ed2cfcadc7654c163843d7871d
Description-en: virtualization daemon - locking daemon
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the virtlockd daemon, which handles storage locking.

Package: libvirt-daemon-log
Description-md5: afd91141bcf26ffc0373ea746dccdca9
Description-en: virtualization daemon - logging daemon
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the virtlogd daemon, which handles logging.

Package: libvirt-daemon-plugin-lockd
Description-md5: bc801dfea26cc9f847a8704e07c51f31
Description-en: virtualization daemon - locking plugin (virtlockd)
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the plugin that implements disk locking using virtlockd.

Package: libvirt-daemon-system
Description-md5: f8d1715ffc2ada86d5049cd6eec95881
Description-en: virtualization daemon - typical QEMU-based deployment
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package doesn't contain any files on its own, and is intended as a
 convenient way to create the most common type of libvirt setup (local QEMU
 hypervisor) in one go.

Package: libvirt-doc
Description-md5: 4428b9c03cb9f13baa929393314737ff
Description-en: virtualization library - documentation
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the documentation for the library.

Package: libvirt-l10n
Description-md5: 43ca79921cba9982829f3f723b2fadea
Description-en: virtualization library - localization files
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the localization files for the library.

Package: libvirt0
Description-md5: f28da71cb93b5d29c71de53107e04545
Description-en: virtualization library
 libvirt exposes a long-term stable API that can be used to interact with
 various hypervisors. Its architecture is highly modular, with most features
 implemented as optional drivers. It can be used from C as well as several
 other programming languages, and it forms the basis of virtualization
 solutions tailored for a range of use cases.
 .
 This package contains the shared library.

Package: libwebkit2gtk-4.0-doc
Description-md5: 920352aab8ba41dddb2fbd0066b144fc
Description-en: WebKitGTK documentation (transitional dummy package)
 This is a transitional dummy package, it can be safely removed.

Package: libwebkit2gtk-4.1-0
Description-md5: 646e3a0937b0325036cf716dec657c04
Description-en: Web content engine library for GTK
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.1 of the API and uses libsoup v3 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the shared libraries.

Package: libwebkit2gtk-4.1-dev
Description-md5: 6f7ca6c0925469585667e0c1b28a2099
Description-en: Web content engine library for GTK - development files
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 4.1 of the API and uses libsoup v3 for
 the networking stack and the GTK 3 widget toolkit.
 .
 This package contains the development files.

Package: libwebkitgtk-6.0-4
Description-md5: 66a23a3e72019d693d95fb2ac548376a
Description-en: Web content engine library for GTK
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 6.0 of the API and uses libsoup v3 for
 the networking stack and the GTK 4 widget toolkit.
 .
 This package contains the shared libraries.

Package: libwebkitgtk-6.0-dev
Description-md5: 18007af192c3d327e12b221008c58783
Description-en: Web content engine library for GTK - development files
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 This build provides version 6.0 of the API and uses libsoup v3 for
 the networking stack and the GTK 4 widget toolkit.
 .
 This package contains the development files.

Package: libwebkitgtk-doc
Description-md5: 158f0bd54e6de44154becdd557cfcdd0
Description-en: Web content engine library for GTK - documentation
 WebKit is a web content engine, derived from KHTML and KJS from KDE, and
 used primarily in Apple's Safari browser.  It is made to be embedded in
 other applications, such as mail readers, or web browsers.
 .
 It is able to display content such as HTML, SVG, XML, and others. It also
 supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more.
 .
 WebKitGTK is a WebKit port designed to be used in GTK applications.
 .
 This package contains the documentation.

Package: libx32asan8
Description-md5: 51a639c3760e456ac48834fb47045c42
Description-en: AddressSanitizer -- a fast memory error detector (x32)
 AddressSanitizer (ASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.

Package: libx32atomic1
Description-md5: 17429d2d39217f0a95507decf171c10f
Description-en: support library providing __atomic built-in functions (x32)
 library providing __atomic built-in functions. When an atomic call cannot
 be turned into lock-free instructions, GCC will make calls into this library.

Package: libx32gcc-14-dev
Description-md5: df49fd36cacd441ececa361c98eaaa4a
Description-en: GCC support library (x32 development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.

Package: libx32gcc-15-dev
Description-md5: df49fd36cacd441ececa361c98eaaa4a
Description-en: GCC support library (x32 development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.

Package: libx32gcc-s1
Description-md5: 23c4abc6ef9d972b6f047316897bf30d
Description-en: GCC support library (x32)
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.

Package: libx32gfortran-15-dev
Description-md5: aae616b6d05c4081844ad0d321e187db
Description-en: Runtime library for GNU Fortran applications (x32 development files)
 This package contains the headers and static library files needed to build
 GNU Fortran applications.

Package: libx32gfortran5
Description-md5: 3c011e928f9c344ce5ade56af0ec77b2
Description-en: Runtime library for GNU Fortran applications (x32)
 Library needed for GNU Fortran applications linked against the
 shared library.

Package: libx32go-14-dev
Description-md5: e36fc6f7d9da2b503ade97820475f44a
Description-en: Runtime library for GNU Go applications (x32 development files)
 This package contains the headers and static library files needed to build
 GNU Go applications.

Package: libx32go-15-dev
Description-md5: e36fc6f7d9da2b503ade97820475f44a
Description-en: Runtime library for GNU Go applications (x32 development files)
 This package contains the headers and static library files needed to build
 GNU Go applications.

Package: libx32go23
Description-md5: 274d67a4807b2168ae6370f3e1f6a565
Description-en: Runtime library for GNU Go applications (x32)
 Library needed for GNU Go applications linked against the
 shared library.

Package: libx32go24
Description-md5: 274d67a4807b2168ae6370f3e1f6a565
Description-en: Runtime library for GNU Go applications (x32)
 Library needed for GNU Go applications linked against the
 shared library.

Package: libx32gomp1
Description-md5: 1388436f97e9425feb598766343a05b7
Description-en: GCC OpenMP (GOMP) support library (x32)
 GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
 in the GNU Compiler Collection.

Package: libx32itm1
Description-md5: 60c3549c857ee22163b3a82b265880de
Description-en: GNU Transactional Memory Library (x32)
 This manual documents the usage and internals of libitm. It provides
 transaction support for accesses to the memory of a process, enabling
 easy-to-use synchronization of accesses to shared memory by several threads.

Package: libx32quadmath0
Description-md5: 514c6a5cffd4febce8121f2d08419504
Description-en: GCC Quad-Precision Math Library (x32)
 A library, which provides quad-precision mathematical functions on targets
 supporting the __float128 datatype. The library is used to provide on such
 targets the REAL(16) type in the GNU Fortran compiler.

Package: libx32stdc++-15-dev
Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e
Description-en: GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: libx32stdc++6
Description-md5: f336833aedca4cda1d9923ce79172164
Description-en: GNU Standard C++ Library v3 (x32)
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: libx32ubsan1
Description-md5: 1e3c22c974d49dfa0d90d25dc725cf74
Description-en: UBSan -- undefined behaviour sanitizer (x32)
 UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
 Various computations will be instrumented to detect undefined behavior
 at runtime. Available for C and C++.

Package: libxatracker2
Description-md5: 016e30e30b0b6c5bb9448c735436c520
Description-en: X acceleration library -- runtime
 This package contains the XA (X acceleration) library.  It is used exclusively
 by the X server to do render, copy and video acceleration.
 .
 XA is intended to be used by the vmware driver for virtualized X acceleration.

Package: libxdp-dev
Description-md5: 16c0b67a9efc2a849ffa8e49b9f4905e
Description-en: library and utilities for use with XDP - development files
 Library for working with the eXpress Data Path facility of the Linux kernel,
 and a collection of utilities and example code that uses the library.
 .
 This package provides the development files for libxdp1.

Package: libxdp1
Description-md5: 9370bea5ec9641d49fe47afa981c60a3
Description-en: library and utilities for use with XDP - shared library
 Library for working with the eXpress Data Path facility of the Linux kernel,
 and a collection of utilities and example code that uses the library.

Package: linux-base
Description-md5: 441643227abc8006d7ae05aa2312ff51
Description-en: Linux image base package
 This package contains files and support scripts for all Linux
 images.

Package: linux-base-sgx
Description-md5: aa4d06104fb4532f5a75e88b8a4292e4
Description-en: Linux image base package for DCAP SGX
 This package contains files and support scripts for all Linux
 images with DCAP SGX drivers.

Package: linux-firmware
Description-md5: 7a047bff9e44dce458a300976c12f9da
Description-en: Firmware for Linux kernel drivers
 This package provides firmware used by Linux kernel drivers.

Package: linux-sysctl-defaults
Description-md5: 5f0a2375f7b57f55127f0859d20e4c34
Description-en: default sysctl configuration for Linux
 This package contains a sysctl configuration file setting some
 sensible defaults for Linux.

Package: logsave
Description-md5: 423ff285c4e5f41ac959b0fda6f812fe
Description-en: save the output of a command in a log file
 The logsave program will execute cmd_prog with the specified
 argument(s), and save a copy of its output to logfile.  If the
 containing directory for logfile does not exist, logsave will
 accumulate the output in memory until it can be written out.  A copy
 of the output will also be written to standard output.

Package: nftables
Description-md5: 24bc0867cd246ced705663120fd62b92
Description-en: Program to control packet filtering rules by Netfilter project
 This software provides an in-kernel packet classification framework that is
 based on a network-specific Virtual Machine (VM) and the nft userspace
 command line tool. The nftables framework reuses the existing Netfilter
 subsystems such as the existing hook infrastructure, the connection tracking
 system, NAT, userspace queueing and logging subsystem.
 .
 nftables replaces the old popular iptables, ip6tables, arptables and ebtables.
 .
 Netfilter software and nftables in particular are used in applications such
 as Internet connection sharing, firewalls, IP accounting, transparent
 proxying, advanced routing and traffic control.
 .
 A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended.

Package: openssl
Description-md5: 9b6de2bb6e1d9016aeb0f00bcf6617bd
Description-en: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.

Package: openssl-provider-legacy
Description-md5: 6ae6f8ddd6448e07b5d86dc9b813dddd
Description-en: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 This package contains the legacy provider. The OpenSSL legacy provider
 supplies OpenSSL implementations of algorithms that have been deemed legacy.
 Such algorithms have commonly fallen out of use, have been deemed insecure by
 the cryptography community, or something similar.
 For details see OSSL_PROVIDER-legacy man page.

Package: openstack-dashboard
Description-md5: a54f5b92f84ab1d5b6c3fa553f99ef77
Description-en: Django web interface for OpenStack
 The OpenStack Dashboard is a reference implementation of a Django site that
 uses the Django-Nova project to provide web based interactions with the
 OpenStack Nova cloud controller.

Package: openstack-dashboard-common
Description-md5: 1b68105103a266973cb0e91a7529a793
Description-en: Django web interface for OpenStack - common files
 The OpenStack Dashboard is a reference implementation of a Django site that
 uses the Django-Nova project to provide web based interactions with the
 OpenStack Nova cloud controller.
 .
 This package provides common files.

Package: python-django-doc
Description-md5: 257e8ca2132ad054b44d0dd521e727f5
Description-en: High-level Python web development framework (documentation)
 Django is a high-level web application framework that loosely follows the
 model-view-controller design pattern.
 .
 Python's equivalent to Ruby on Rails, Django lets you build complex
 data-driven websites quickly and easily - Django focuses on automating as much
 as possible and adhering to the "Don't Repeat Yourself" (DRY) principle.
 .
 Django additionally emphasizes reusability and "pluggability" of components;
 many generic third-party "applications" are available to enhance projects or
 to simply to reduce development time even further.
 .
 This package contains the HTML documentation and example projects.

Package: python3-django
Description-md5: efe2f6ec2ae89851c710c280956fa785
Description-en: High-level Python web development framework
 Django is a high-level web application framework that loosely follows the
 model-view-controller design pattern.
 .
 Python's equivalent to Ruby on Rails, Django lets you build complex
 data-driven websites quickly and easily - Django focuses on automating as much
 as possible and adhering to the "Don't Repeat Yourself" (DRY) principle.
 .
 Django additionally emphasizes reusability and "pluggability" of components;
 many generic third-party "applications" are available to enhance projects or
 to simply to reduce development time even further.
 .
 Notable features include:
  * An object-relational mapper (ORM)
  * Automatic admin interface
  * Elegant URL dispatcher
  * Form serialization and validation system
  * Templating system
  * Lightweight, standalone web server for development and testing
  * Internationalization support
  * Testing framework and client

Package: python3-django-horizon
Description-md5: a44d020aa6903cc59b58bdbc9eb3d400
Description-en: Django module providing web based interaction with OpenStack (Python 3)
 The Django-Nova project is a Django module that is used to provide web based
 interactions with the OpenStack Nova cloud controller.
 .
 This package provides the Python 3 module.

Package: python3-django-openstack-auth
Description-md5: 24e7591fda8be85ab0eaf73129aaf2d7
Description-en: Django authentication backend for Openstack - Python 3
 Django authentication backend for use with the OpenStack Keystone Identity
 backend. This Python module is used by Horizon (the Openstack Dashport web
 GUI) to auth against Keystone.
 .
 This package provides the Python 3 module.

Package: python3-ibus-1.0
Description-md5: e3ef5ddc70a621da61baf38744361076
Description-en: Intelligent Input Bus - introspection overrides for Python (Python 3)
 IBus is an Intelligent Input Bus. It is a new input framework for the Linux
 OS. It provides full featured and user friendly input method user interface.
 It also may help developers to develop input method easily.
 .
 This package contains GObject Introspection overrides for Python that
 can be used by Python applications using IBus.

Package: qemu-system-data
Description-md5: c61105eaa5edddd1459bc7ebfd8348d6
Description-en: QEMU full system emulation (data files)
 This package provides architecture-neutral data files
 (such as keyboard definitions, icons) for system-mode
 QEMU emulation (qemu-system-*) packages.

Package: ss-dev
Description-md5: 9f7a224dc59f72d5dc2ab6204013b575
Description-en: command-line interface parsing library - headers and static libraries
 This package includes a tool that parses a command table to generate
 a simple command-line interface parser, the include files needed to
 compile and use it, and the static libs.
 .
 It was originally inspired by the Multics SubSystem library.
 .
 This package contains the development environment for the ss library.

Package: vsftpd
Description-md5: 81386f72ac91a5ea48f8db0b023f3f9b
Description-en: lightweight, efficient FTP server written for security
 This package provides the "Very Secure FTP Daemon", written from
 the ground up with security in mind.
 .
 It supports both anonymous and non-anonymous FTP access, PAM authentication,
 bandwidth limiting, and the Linux sendfile() facility.

Package: vsftpd-dbg
Description-md5: 545fc3167a09139cdae7003374723dc7
Description-en: lightweight, efficient FTP server written for security (debug)
 This package provides the "Very Secure FTP Daemon", written from
 the ground up with security in mind.
 .
 This package contains the debugging symbols.

Package: cpp-15-aarch64-linux-gnu
Description-md5: 60cdf4bb445be15901cb015feeb990b7
Description-en: GNU C preprocessor for aarch64-linux-gnu
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor configured for aarch64-linux-gnu architecture but not
 the compiler.

Package: g++-15-aarch64-linux-gnu
Description-md5: b996f012975000f1ea76fd985d3446d1
Description-en: GNU C++ compiler for aarch64-linux-gnu architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This package contains C++ cross-compiler for aarch64-linux-gnu architecture.

Package: gcc-15-aarch64-linux-gnu
Description-md5: a174b3cd9d1ab0fcdf59f034f24cdb2b
Description-en: GNU C compiler for the aarch64-linux-gnu architecture
 This is the GNU C compiler for the aarch64-linux-gnu architecture,
 a fairly portable optimizing compiler for C.

Package: gfortran-15-aarch64-linux-gnu
Description-md5: c9a58ab7359394ce988886339852089d
Description-en: GNU Fortran compiler for the aarch64-linux-gnu architecture
 This is the GNU Fortran compiler for the aarch64-linux-gnu architecture,
 which compiles Fortran on platforms supported by the gcc compiler.
 It uses the gcc backend to generate optimized code.

Package: girepository-tools
Description-md5: 4bf029f1086b3f3032b36fe7d4d63373
Description-en: Tools for working with GObject-Introspection repositories
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK, GIMP, and GNOME.
 .
 This package contains developer-oriented command-line tools for working
 with GObject-Introspection typelibs and GIR XML, which are used to
 provide language bindings and documentation for GLib-based libraries:
 .
  * aarch64-linux-gnu-gi-compile-repository
  * aarch64-linux-gnu-gi-decompile-typelib
  * aarch64-linux-gnu-gi-inspect-typelib
 .
 When used via this package, these tools must be invoked with their
 host-architecture-specific names.
 .
 For command-line compatibility with non-Debian-based GLib packaging,
 the libglib2.0-dev package also provides versions of these tools for the
 system's primary architecture, named without the architecture prefix.

Package: gnome-settings-daemon
Description-md5: 31f06b20f036e71da14412083d98ad89
Description-en: daemon handling the GNOME session settings
 This package contains the daemon which is responsible for setting the
 various parameters of a GNOME session and the applications that run
 under it. It handles the following kinds of settings:
 .
  * Keyboard: layout, accessibility options, shortcuts, media keys
  * Clipboard management
  * Theming: background, icons, GTK+ applications
  * Cleanup of unused files
  * Mouse: cursors, speed, accessibility options
  * Startup of other daemons: screensaver, sound daemon
 .
 It also sets various application settings through X resources and
 freedesktop.org XSETTINGS.

Package: gnome-settings-daemon-dev
Description-md5: 7da21b55f83cd4a428a2bd849fda6b81
Description-en: Headers for building applications communicating with gnome-settings-daemon
 This package contains header files required to build applications that
 communicate with the GNOME settings daemon over D-Bus.

Package: cpp-15-arm-linux-gnueabihf
Description-md5: ed68a0d5b068e9ec1abe470407d0cbf5
Description-en: GNU C preprocessor for arm-linux-gnueabihf
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor configured for arm-linux-gnueabihf architecture but not
 the compiler.

Package: g++-15-arm-linux-gnueabihf
Description-md5: 8217684381d0545df03fa8d52efefabb
Description-en: GNU C++ compiler for arm-linux-gnueabihf architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This package contains C++ cross-compiler for arm-linux-gnueabihf architecture.

Package: gcc-15-arm-linux-gnueabihf
Description-md5: 33f90d4dfb358631d3e5a94e55aaa543
Description-en: GNU C compiler for the arm-linux-gnueabihf architecture
 This is the GNU C compiler for the arm-linux-gnueabihf architecture,
 a fairly portable optimizing compiler for C.

Package: gfortran-15-arm-linux-gnueabihf
Description-md5: 97ae8549d5e903133d4832ce451bf9d5
Description-en: GNU Fortran compiler for the arm-linux-gnueabihf architecture
 This is the GNU Fortran compiler for the arm-linux-gnueabihf architecture,
 which compiles Fortran on platforms supported by the gcc compiler.
 It uses the gcc backend to generate optimized code.

Package: girepository-tools
Description-md5: 30e6189aff1e855d202377408d2362b1
Description-en: Tools for working with GObject-Introspection repositories
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK, GIMP, and GNOME.
 .
 This package contains developer-oriented command-line tools for working
 with GObject-Introspection typelibs and GIR XML, which are used to
 provide language bindings and documentation for GLib-based libraries:
 .
  * arm-linux-gnueabihf-gi-compile-repository
  * arm-linux-gnueabihf-gi-decompile-typelib
  * arm-linux-gnueabihf-gi-inspect-typelib
 .
 When used via this package, these tools must be invoked with their
 host-architecture-specific names.
 .
 For command-line compatibility with non-Debian-based GLib packaging,
 the libglib2.0-dev package also provides versions of these tools for the
 system's primary architecture, named without the architecture prefix.

Package: cpp-15-i686-linux-gnu
Description-md5: b8282273c17bed5005498d3acc86c9d4
Description-en: GNU C preprocessor for i686-linux-gnu
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor configured for i686-linux-gnu architecture but not
 the compiler.

Package: g++-15-i686-linux-gnu
Description-md5: 88bdc3f5d96144f5748dae6f61c62299
Description-en: GNU C++ compiler for i686-linux-gnu architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This package contains C++ cross-compiler for i686-linux-gnu architecture.

Package: gcc-15-i686-linux-gnu
Description-md5: ba5a678e8889d9e2f2dd41bf10f39ab5
Description-en: GNU C compiler for the i686-linux-gnu architecture
 This is the GNU C compiler for the i686-linux-gnu architecture,
 a fairly portable optimizing compiler for C.

Package: gfortran-15-i686-linux-gnu
Description-md5: b4cc25194ee0177ada8bf1a75e17c538
Description-en: GNU Fortran compiler for the i686-linux-gnu architecture
 This is the GNU Fortran compiler for the i686-linux-gnu architecture,
 which compiles Fortran on platforms supported by the gcc compiler.
 It uses the gcc backend to generate optimized code.

Package: girepository-tools
Description-md5: a002091dcd662b79e41bc703333c7261
Description-en: Tools for working with GObject-Introspection repositories
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK, GIMP, and GNOME.
 .
 This package contains developer-oriented command-line tools for working
 with GObject-Introspection typelibs and GIR XML, which are used to
 provide language bindings and documentation for GLib-based libraries:
 .
  * i686-linux-gnu-gi-compile-repository
  * i686-linux-gnu-gi-decompile-typelib
  * i686-linux-gnu-gi-inspect-typelib
 .
 When used via this package, these tools must be invoked with their
 host-architecture-specific names.
 .
 For command-line compatibility with non-Debian-based GLib packaging,
 the libglib2.0-dev package also provides versions of these tools for the
 system's primary architecture, named without the architecture prefix.

Package: lib64asan8
Description-md5: 1a9f659ca4439e2038933f842e164011
Description-en: AddressSanitizer -- a fast memory error detector (64bit)
 AddressSanitizer (ASan) is a fast memory error detector.  It finds
 use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs.

Package: lib64atomic1
Description-md5: dcde910e366c584abcb0cd438bd4f06e
Description-en: support library providing __atomic built-in functions (64bit)
 library providing __atomic built-in functions. When an atomic call cannot
 be turned into lock-free instructions, GCC will make calls into this library.

Package: lib64gcc-14-dev
Description-md5: 44d3aaff7c21b9d5950416cabd2035a0
Description-en: GCC support library (64bit development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.

Package: lib64gcc-15-dev
Description-md5: 44d3aaff7c21b9d5950416cabd2035a0
Description-en: GCC support library (64bit development files)
 This package contains the headers and static library files necessary for
 building C programs which use libgcc, libgomp, libquadmath, libssp or libitm.

Package: lib64gcc-s1
Description-md5: 3fa6e907907011d66479852df2d160b2
Description-en: GCC support library (64bit)
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.

Package: lib64gfortran-15-dev
Description-md5: 552b8ddfa55fb97fed937c39ac7c9855
Description-en: Runtime library for GNU Fortran applications (64bit development files)
 This package contains the headers and static library files needed to build
 GNU Fortran applications.

Package: lib64gfortran5
Description-md5: 46b19e07ae6f07ea3757b2684cf21c0d
Description-en: Runtime library for GNU Fortran applications (64bit)
 Library needed for GNU Fortran applications linked against the
 shared library.

Package: lib64go-14-dev
Description-md5: a7ef5921b4b83cb852b9de565ed5fece
Description-en: Runtime library for GNU Go applications (64bit development files)
 This package contains the headers and static library files needed to build
 GNU Go applications.

Package: lib64go-15-dev
Description-md5: a7ef5921b4b83cb852b9de565ed5fece
Description-en: Runtime library for GNU Go applications (64bit development files)
 This package contains the headers and static library files needed to build
 GNU Go applications.

Package: lib64go23
Description-md5: 07fa56d3e232224f82aa278bc1a968bd
Description-en: Runtime library for GNU Go applications (64bit)
 Library needed for GNU Go applications linked against the
 shared library.

Package: lib64go24
Description-md5: 07fa56d3e232224f82aa278bc1a968bd
Description-en: Runtime library for GNU Go applications (64bit)
 Library needed for GNU Go applications linked against the
 shared library.

Package: lib64gomp1
Description-md5: a0950cb11ce700192ac4d8252bba5f9e
Description-en: GCC OpenMP (GOMP) support library (64bit)
 GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers
 in the GNU Compiler Collection.

Package: lib64itm1
Description-md5: fcc38020a0be9787c7556be2d025d1a4
Description-en: GNU Transactional Memory Library (64bit)
 GNU Transactional Memory Library (libitm) provides transaction support for
 accesses to the memory of a process, enabling easy-to-use synchronization of
 accesses to shared memory by several threads.

Package: lib64quadmath0
Description-md5: 49289451e79bd744581e76fbb05eb94d
Description-en: GCC Quad-Precision Math Library  (64bit)
 A library, which provides quad-precision mathematical functions on targets
 supporting the __float128 datatype. The library is used to provide on such
 targets the REAL(16) type in the GNU Fortran compiler.

Package: lib64stdc++-15-dev
Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e
Description-en: GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: lib64stdc++6
Description-md5: 0b7bd88ae533336258d0ca3201397c0f
Description-en: GNU Standard C++ Library v3 (64bit)
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: lib64ubsan1
Description-md5: c22f6718422baad4c7aa40c7b8c9e6ac
Description-en: UBSan -- undefined behaviour sanitizer (64bit)
 UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined.
 Various computations will be instrumented to detect undefined behavior
 at runtime. Available for C and C++.

Package: cpp-15-powerpc64le-linux-gnu
Description-md5: 2c7bd4237665c7473651107af2193fed
Description-en: GNU C preprocessor for powerpc64le-linux-gnu
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor configured for powerpc64le-linux-gnu architecture but not
 the compiler.

Package: g++-15-powerpc64le-linux-gnu
Description-md5: 0be28451d4d61c7a7c7261ee29e52e35
Description-en: GNU C++ compiler for powerpc64le-linux-gnu architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This package contains C++ cross-compiler for powerpc64le-linux-gnu architecture.

Package: gcc-15-powerpc64le-linux-gnu
Description-md5: 9a78fbda526c5f3157cb5ab0c3cf7fc1
Description-en: GNU C compiler for the powerpc64le-linux-gnu architecture
 This is the GNU C compiler for the powerpc64le-linux-gnu architecture,
 a fairly portable optimizing compiler for C.

Package: gfortran-15-powerpc64le-linux-gnu
Description-md5: c4e5fd95008e20fa21421f07aca27e28
Description-en: GNU Fortran compiler for the powerpc64le-linux-gnu architecture
 This is the GNU Fortran compiler for the powerpc64le-linux-gnu architecture,
 which compiles Fortran on platforms supported by the gcc compiler.
 It uses the gcc backend to generate optimized code.

Package: girepository-tools
Description-md5: e255a3a295093fe75b466c05d2c24dc8
Description-en: Tools for working with GObject-Introspection repositories
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK, GIMP, and GNOME.
 .
 This package contains developer-oriented command-line tools for working
 with GObject-Introspection typelibs and GIR XML, which are used to
 provide language bindings and documentation for GLib-based libraries:
 .
  * powerpc64le-linux-gnu-gi-compile-repository
  * powerpc64le-linux-gnu-gi-decompile-typelib
  * powerpc64le-linux-gnu-gi-inspect-typelib
 .
 When used via this package, these tools must be invoked with their
 host-architecture-specific names.
 .
 For command-line compatibility with non-Debian-based GLib packaging,
 the libglib2.0-dev package also provides versions of these tools for the
 system's primary architecture, named without the architecture prefix.

Package: girepository-tools
Description-md5: 0faf2a9a082ea04012e1b20cfc25cf4f
Description-en: Tools for working with GObject-Introspection repositories
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK, GIMP, and GNOME.
 .
 This package contains developer-oriented command-line tools for working
 with GObject-Introspection typelibs and GIR XML, which are used to
 provide language bindings and documentation for GLib-based libraries:
 .
  * riscv64-linux-gnu-gi-compile-repository
  * riscv64-linux-gnu-gi-decompile-typelib
  * riscv64-linux-gnu-gi-inspect-typelib
 .
 When used via this package, these tools must be invoked with their
 host-architecture-specific names.
 .
 For command-line compatibility with non-Debian-based GLib packaging,
 the libglib2.0-dev package also provides versions of these tools for the
 system's primary architecture, named without the architecture prefix.

Package: cpp-15-s390x-linux-gnu
Description-md5: 15322c927af928619270877121b482b0
Description-en: GNU C preprocessor for s390x-linux-gnu
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor configured for s390x-linux-gnu architecture but not
 the compiler.

Package: g++-15-s390x-linux-gnu
Description-md5: fafd9d967c83a64a002649a8dd459c79
Description-en: GNU C++ compiler for s390x-linux-gnu architecture
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This package contains C++ cross-compiler for s390x-linux-gnu architecture.

Package: gcc-15-s390x-linux-gnu
Description-md5: 2323f276c14ea19238d792f7bdca46a5
Description-en: GNU C compiler for the s390x-linux-gnu architecture
 This is the GNU C compiler for the s390x-linux-gnu architecture,
 a fairly portable optimizing compiler for C.

Package: gfortran-15-s390x-linux-gnu
Description-md5: 01fdbbd9efb81f1ce24e9908283f9b07
Description-en: GNU Fortran compiler for the s390x-linux-gnu architecture
 This is the GNU Fortran compiler for the s390x-linux-gnu architecture,
 which compiles Fortran on platforms supported by the gcc compiler.
 It uses the gcc backend to generate optimized code.

Package: girepository-tools
Description-md5: 9457d74d33f52729ed78a4d6100ac8a4
Description-en: Tools for working with GObject-Introspection repositories
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK, GIMP, and GNOME.
 .
 This package contains developer-oriented command-line tools for working
 with GObject-Introspection typelibs and GIR XML, which are used to
 provide language bindings and documentation for GLib-based libraries:
 .
  * s390x-linux-gnu-gi-compile-repository
  * s390x-linux-gnu-gi-decompile-typelib
  * s390x-linux-gnu-gi-inspect-typelib
 .
 When used via this package, these tools must be invoked with their
 host-architecture-specific names.
 .
 For command-line compatibility with non-Debian-based GLib packaging,
 the libglib2.0-dev package also provides versions of these tools for the
 system's primary architecture, named without the architecture prefix.